To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
WARNING
A. PRECAUTIONS
B. FEATURES
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
THIS MINI CCTV COLOR CCD CAMERA Introduces advanced CCD and
a
a
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service
person for servicing.
digital technology, and offers customers
picture.
high quality and high resolution
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
b
c
Handle the camera with care.
Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
MODEL: QSDS1428D
Comes with 2.8 pinhole lens
Indoor use only
SA 1965
CAUTION:
CAUTION:
To prevent electric shocks and
Indoor Mini Color CCD Camera
With Pinhole Lens
Has a
420TVL
high-resolution 1/4" CCD image sensor with image resolution of
RISK OF ELECTRIC SHOCK
DO NOT OPEN
d
e
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
risk of fire hazards, only use the power
supply specifled for unit.
TO REDUCE THERISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
CAUTION:
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
PERSONINEL
Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.
Wide viewing angle 120 degrees
Low power consumption
Warning- This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
Caution
CCTV SYSTEM
C. CONNECTION
D. SPECIFICATIONS
E. DIMENSIONS
a
Onemonitor system with one camera
AC ADAPTER
Video monitor
Image Sensor
COLOR 1/4" SONY CCD
Pixel
NTSC:510(H) 492(V) PAL:500(H) 582(H)
420TVL
CAMERA
Horizontal Resolution
Sync System
Internal
Scanning system
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
Electronic Shutter
White Balance
Gamma
b
Onemonitor system with two or more cameras
0.45
Video monitor
S/N Ratio
≥48dB
AC ADAPTER
CAMERA
Video Output
1.0Vp-p 75Ω BNC
---
Indoor Use only
Viewing Angle
Lens
109 degrees
Fixed 2.8mm, pinhole
AGC
On/Off
BLC
On/Off
Usable Illumination
Power Supply
Power Consumption
Operating Temp
Weight
0.2 Lux
DC12V 100mA
<1.5W
-10℃ +50℃ (14 F to 122 F) RH 95% Max
2.2 oz (62g)
DVR
|