STEP 2: Connect other home theater components
(optional)
YHT-185 Digital Home Theater System
5
6
GARK
En
System Connection Guide
CAUTION
© 2007
All rights reserved.
Components must not be plugged in while connecting them. Wait until all connections are made before
Printed in China
WJ99940
plugging in your components.
AUDIO
L
VIDEO
R
Yamaha created this package to greatly enhance your audio and home theater enjoyment.
This System Connection Guide will help you get started. Follow the steps to connect the
speakers first. Then connect your video monitor, DVD Player and other components.
Refer to your Owner’s Manuals as well as those that came with your other components for
complete instructions and precautions.
IN
HTR-6030
4
5
6
1
OUT
Be sure that all components are not plugged in while making connections.
ANT.
VIDEO
S-VIDEO
DVR/VCR
HTR-6030
STEP 1: Unpack and connect speakers
Connect a DVR/VCR
Video monitor
Connect DVR IN/OUT jacks of the receiver and the input/output jacks of your
component using RCA audio/video cables (not included) as shown.
1
2
5
1
2
3
HTR-6030
To the front right speaker (1)
To the front left speaker (2)
Connect a video monitor
Connect front speakers
6
NX-C270
Connect the MONITOR OUT jack of the receiver and the video input jack of your video
monitor using an RCA video cable (not included).
Connect speaker wires for front speakers (1, 2). The positive (+) side of the wire with the
white stripe attaches to the red terminal. The negative (–) side attaches to the black terminal.
CAUTION
NX-E270
7
3
4
Receiver must not be plugged in while connecting speakers.
2
3
4
HTR-6030
HTR-6030
NX-E270
SW-P270
Inspect contents
After unpacking, inspect the contents to confirm you have the above items:
NX-E270 two front speakers (1, 2), NX-E270 two surround speakers (3, 4),
NX-C270 one center speaker (5), SW-P270 powered subwoofer (6),
HTR-6030 AV Receiver (7) with remote control. Also included, but not shown, are
five speaker wires, one subwoofer cable, AM and FM antennas, fasteners, non-skid
pads, and three related Owner’s Manuals.
CD player
HTR-6030
To the center speaker
(5)
Connect a CD player
To the surround
right speaker (3)
To the surround left
speaker (4)
Connect CD jacks of the receiver and the output jacks of your CD player using RCA
audio cables (not included).
DVD player
Connect surround and center speakers
HTR-6030
Connect speaker wire for surround speakers (3, 4) and center speaker (5). The positive
(+) side of the wire with the white stripe attaches to the red terminal. The negative (–) side
attaches to the black terminal.
7
8
Connect a DVD player (video)
6
1
1 Front right speaker
2 Front left speaker
3 Surround right speaker
4 Surround left speaker
5 Center speaker
CAUTION
Connect the DVD VIDEO IN jack of the receiver and the video output jack of your
DVD player using an RCA video cable (not included).
Receiver must not be plugged in while connecting speakers.
2
5
3
6 Subwoofer
HTR-6030
MD/CD recorder
4
HTR-6030
Connect an MD/CD recorder
Connect MD/CD-R IN/OUT jacks of the receiver and the input/output jacks of your
components using RCA audio cables (not included) as shown.
Place speakers
Place speakers so they appear in the approximate positions as shown in the diagram
above. See your Owner’s Manual for more information on speaker placement and
mounting.
SW-P270
DVD player
HTR-6030
Connect the subwoofer
Connect the subwoofer cable to the subwoofer (6). Set subwoofer VOLUME control to
half-way mark and POWER to OFF (rear panel).
CAUTION
STEP 3: Plug in
Plug in the subwoofer, receiver, DVD player and other components. Power on the receiver
first, then the subwoofer and other components. Please see each of your respective Owner’s
Manuals for recommended guidelines and settings.
Connect a DVD player (audio)
Components must not be plugged in while connecting them.
Connect the DVD DIGITAL INPUT jack of the receiver and the digital output jack of your
DVD player using a coaxial cable (not included).
70 mm
HTR-6030
7
NX-E270
NX-C270
Connect speaker wires
Enjoy the Yamaha Home Theater experience
Connect speaker wire for front speakers (1, 2), surround speakers (3, 4), and
center speaker (5). The positive (+) side of the wire with the white stripe attaches to
the red terminal. The negative (–) side attaches to the black terminal. See your
Owner’s Manual for more information on speaker wire connections.
• Be sure to put batteries in your remote control (see Owner’s Manual for instructions).
• Refer to your Owner’s Manuals for each component in your system for more
information.
Connect antennas
DSS/Cable/HDTV
tuner box
• You can simply operate the receiver by using the SCENE function (see page 4 in the
Owner’s Manual of HTR-6030).
Keeping receiver unplugged, connect AM loop antenna and indoor FM antenna as shown.
For more information about obtaining clear reception and grounding, see your Owner’s
Manual.
HTR-6030
Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system.
Connect a DSS/Cable/HDTV tuner box
Connect the DTV/CBL jacks of the receiver and the output jacks of your set-top box using
RCA audio/video cables (not included) as shown.
|