Samsung MM A880 User Manual

Sprint PCS® Service  
Sprint PCS VisionSM Multimedia Phone  
MM-A880 by Samsung®  
www.sprintpcs.com  
© 2005 Sprint. All rights reserved. No reproduction in whole or in part without  
prior written approval. Sprint, the diamond logo design, and all other Sprint  
marks referenced herein are trademarks of Sprint. All other trademarks are  
the property of their respective owners.  
Printed in South Korea  
Table of Contents  
Entering Numbers, Symbols, Emoticons,  
Preset Messages and Recent Messages . . . . . . . . . . . . . .46  
Security Features for Sprint PCS VisionSM . . . . . . . . . . . . . .83  
Sending Sprint PCS Picture MailSM . . . . . . . . . . . . . . . . . . .192  
3B. Sprint PCS VisionSM . . . . . . . . . . . . . . . . . . . . . . 231  
3C. Sprint PCS Voice CommandSM . . . . . . . . . . . . . 257  
Welcome to Sprint  
Sprint has the most complete, all-digital wireless network in the  
nation. Depend on it.  
Sprint is committed to bringing you the best wireless  
technology available. We built our complete, nationwide  
network from the ground up, so all your services –  
whether it’s Voicemail, Caller ID, email, or Sprint PCS  
Picture Mail – will work the same wherever you go on the  
Sprint Nationwide PCS Network.  
This guide will familiarize you with our technology and  
your new Sprint PCS Phone through simple, easy-to-follow  
instructions. It’s all right here – from setting up your  
account passwords and voicemail to using the most  
advanced features of Sprint PCS VisionSM.  
Sprint PCS. Now, that’s betterSM.  
Welcome and thank you for choosing Sprint.  
i
 
Introduction  
This Phone Guide introduces you to Sprint PCS Service and  
all the features of your new phone. It’s divided into four  
sections:  
Section 1: Getting Started  
Section 2: Your Sprint PCS Phone  
Section 3: Sprint PCS Service Features  
Section 4: Safety Guidelines and Warranty Information  
Throughout this guide, you'll find tips that highlight  
special shortcuts and timely reminders to help you make  
the most of your new phone and service. The Table of  
Contents and Index will also help you quickly locate  
specific information.  
You'll get the most out of your phone if you read each  
section. However, if you'd like to get right to a specific  
feature, simply locate that section in the Table of Contents  
and go directly to that page. Follow the instructions in that  
section, and you'll be ready to use your phone in no time.  
Due to updates in phone software, this printed guide  
may not be the most current version for your phone.  
Visit www.sprintpcs.com and sign on to My PCS to  
access the most recent version of the phone guide.  
Phone  
Guide  
Note:  
ii  
 
Section 1  
Getting Started  
 
2
Section 1A  
Setting Up Service  
In This Section  
Setting up service on your new Sprint PCS Phone is quick and  
easy. This section walks you through the necessary steps to  
unlock your phone, set up your voicemail, establish  
passwords, and contact Sprint for assistance with your  
Sprint PCS Service.  
3
     
Getting Started With Sprint PCS Service  
Determining if Your Phone is Already Activated  
If you purchased your phone at a Sprint Store, it is  
probably activated, unlocked, and ready to use. If you  
received your phone in the mail, it probably has been  
activated; all you need to do is unlock it.  
If your phone is not activated, please refer to the  
Welcome to Sprint brochure included with your phone.  
Unlocking Your Phone  
To unlock your phone, follow these easy steps:  
1. Press and hold  
for a few seconds to turn the  
phone on.  
2. Press Unlock (  
).  
To select a softkey, press the softkey button directly below  
the softkey text that appears at the bottom left and bottom  
right of your phone’s display screen. Softkey actions  
change according to the screen you’re viewing and will not  
appear if there is no corresponding action available.  
Note:  
3. Enter your four-digit lock code. (For security  
purposes, the code is not visible as you type.)  
If you can’t recall your lock code, try using the last four  
digits of either your Social Security number or Sprint PCS  
Phone number or try 0000 or NATL (6285). If none of these  
work, call Sprint Customer Service at 1-888-211-4PCS  
(4727).  
Tip:  
4
 
Setting Up Your Voicemail  
All unanswered calls to your Sprint PCS Phone are  
automatically transferred to your voicemail, even if your  
phone is in use or turned off. Therefore, you will want to  
set up your voicemail and personal greeting as soon as  
your Sprint PCS Phone is activated.  
To set up your voicemail:  
1. From standby mode, press and hold  
.
2. Follow the system prompts to:  
Create your pass code  
Record your greeting  
Record your name announcement  
Choose whether or not to activate One-Touch  
Message Access (a feature that lets you access  
messages simply by pressing and holding  
bypassing the need for you to enter your pass  
code)  
,
The voicemail setup process may vary in certain Affiliate  
areas.  
Note:  
For more information about using your voicemail, see  
5
   
Sprint PCS Account Passwords  
As a Sprint PCS customer, you enjoy unlimited access to  
your personal account information, your voicemail  
account, and your Sprint PCS Vision account. To ensure  
that no one else has access to your information, you will  
need to create passwords to protect your privacy.  
Account Password  
If you are the account owner, you'll have an account  
password to sign on to www.sprintpcs.com and to use when  
calling Sprint Customer Service. Your default account  
password is the last four digits of your Social Security  
number. If you are not the account owner (if someone else  
receives the invoice for your Sprint PCS Service), you can  
get a sub-account password at www.sprintpcs.com.  
Voicemail Password  
You'll create your voicemail password (or pass code) when  
on page 212 for more information on your voicemail  
password.  
Sprint PCS Vision Password  
With your Sprint PCS Vision Multimedia Phone MM-A880 by  
Samsung, you may elect to set up a Sprint PCS Vision  
Password. This optional password may be used to  
authorize purchase of Premium Services content and to  
protect personal information on multi-phone accounts.  
For more information, or to change your passwords, sign  
on to www.sprintpcs.com or call Sprint Customer Service at  
1-888-211-4PCS (4727).  
6
   
Getting Help  
You can go online to:  
Access your account information  
Check your minutes used (depending on your  
Sprint PCS Service Plan)  
View and pay your bill  
Make your life easier by enrolling in Online Invoicing  
and Automatic Payment  
Purchase accessories  
Shop for the latest Sprint PCS Phones  
View available Sprint PCS Service Plans and options  
Learn more about Sprint PCS Vision and other great  
products like Sprint PCS Picture MailSM, games, ringers,  
screen savers, and more  
Reaching Sprint Customer Service  
You can reach Sprint Customer Service many different  
ways:  
Dial  
on your Sprint PCS Phone  
Sign on to your account at www.sprintpcs.com  
Call us toll-free at 1-888-211-4727 (Consumer customers)  
or 1-888-788-4727 (Business customers)  
Write to us at Sprint Customer Service, P.O. Box 8077,  
London, KY 40742  
7
   
Receiving Automated Invoicing Information  
For your convenience, your phone gives you access to  
invoicing information on your Sprint PCS Account. This  
information includes balance due, payment received,  
invoicing cycle, and an estimate of the number of minutes  
used since your last invoicing cycle. (Normal airtime usage  
will apply.)  
To access automated invoicing information:  
Press  
.
This service may not be available in all Affiliate areas.  
Note:  
Sprint PCS Directory Assistance  
You have access to a variety of services and information  
through Sprint PCS Directory Assistance, including  
residential, business, and government listings; assistance  
with local or long-distance calls; movie listings; and hotel,  
restaurant, shopping, and major local event information.  
There is a per-call charge, and you will be billed for airtime.  
To call Sprint PCS Directory Assistance:  
Press  
.
8
 
Sprint PCS Operator Services  
Sprint PCS Operator Services provides assistance when  
placing collect calls or when placing calls billed to a local  
telephone calling card or third party.  
To access Sprint PCS Operator Services:  
Press  
.
For more information or to see the latest in products and  
services, visit us online at www.sprintpcs.com.  
Sprint PCS Operator Services may not be available in all  
Affiliate areas.  
Note:  
Welcome and thank you for choosing Sprint.  
9
 
10  
Section 2  
Your Sprint PCS Phone  
 
12  
Section 2A  
Your Sprint PCS Phone: The Basics  
In This Section  
Your Sprint PCS Phone is packed with features that simplify your  
life and expand your ability to stay connected to the people and  
information that are important to you. This section will guide  
you through the basic functions and calling features of  
your phone.  
13  
   
Front View of Your Phone  
14  
   
Key Functions  
1. Speaker: The speaker allows you to hear the other  
caller and the different ring tones and sounds offered  
by your phone.  
2. Display Screen: This screen displays all the  
information needed to operate your phone.  
3. Headset Jack: Allows you to plug in an optional  
headset for convenient, hands-free conversations.  
4. Left Softkey: This key is used to navigate through  
menus and applications by selecting the choice  
available in the Left Softkey Option on your display  
screen.  
5. OK Key: Pressing (  
) when navigating through a  
menu accepts the highlighted choice in the menu. If  
you press once in standby mode, the Picture & Video  
menu is displayed. If you press and hold, the camera  
is launched.  
6. TALK Key: Allows you to place or receive a call. In  
standby mode, press the key once to access the  
Recent call log. If you press and hold the key down,  
you will initiate the Voice Recognition feature.  
7. Volume Key: Allows you to adjust the ringer volume in  
standby mode (with the flip open) or adjust the voice  
volume during a call. The volume key can also be  
used to scroll up or down to navigate through the  
different menu options. To mute the ringer during an  
incoming call, press the volume key up or down.  
8. Voicemail Key: Press and hold to automatically dial  
your voicemail.  
15  
   
9. Numeric Keypad: Use these keys to enter numbers,  
letters, and characters.  
10. Shift/Asterisk Key: Enters the asterisk [*] character for  
calling features. In text entry mode, press to change  
the capitalization mode.  
11. Microphone: The Microphone allows the other caller  
to hear you clearly when you are speaking to them.  
12. Accessory Interface Connector: This connector is used  
connect any available accessory cables to your  
phone.  
13. Power Interface Connector: This connector is used to  
plug in the charging accessories.  
14. Plus Code Dialing Key: Automatically dials the  
international access code for the country in which  
you are located (for instance, 011 for international  
calls placed from the United States).  
15. Space/Pound Key: Enters the pound [#] character for  
calling features. In text entry mode, press to enter a  
space.  
16. BACK Key: Deletes characters from the display when  
you are in text entry mode. When in a menu, press to  
return to the previous menu. This key also allows you  
to return to the previous screen in a Sprint PCS Vision  
session.  
17. END Key: Ends a call. Press and hold this key for a few  
seconds to turn your phone on or off. While in the  
main menu, it returns the phone to standby mode  
and cancels your input. When you receive an  
incoming call, press to enter silent mode and mute  
the ringer.  
16  
18. Side Camera Key: Allows you to launch the Camera  
with the press of a button when the flip open. When  
the flip closed, you can press and hold to launch the  
camera using the external LCD as a viewfinder.  
19. Right Softkey: This key is used to navigate through  
menus and applications by selecting the choice  
available in the Right Softkey Option on your display  
screen.  
20. Navigation Key: This key allows you to scroll through  
the phone menu options and provides a shortcut to  
phone functions from standby mode.  
21. VOD Key: Press to automatically launch the browser  
and connect to Media Player.  
17  
Viewing the Display Screen  
Your phone’s display screen provides a wealth of information  
about your phone’s status and options. This list identifies the  
symbols you’ll see on your phone’s display screen:  
To view a list of your phone’s icons and descriptions, from  
the main menu select Settings > Phone Info > Icon  
Glossary.  
Tip:  
displays your current signal strength. The more  
lines you have, the stronger your signal.  
means your phone cannot find a signal.  
tells you a call is in progress.  
indicates that you have voicemail, text,  
numeric pages, picture messages, video  
messages, or Sprint PCS Web Alert messages  
waiting. Press  
briefly to see a list of pending  
messages or press and hold to dial your  
voicemail box.  
indicates that there is an unread message in  
your inbox.  
indicates that the text message has been read.  
indicates that there is an unread urgent message  
in your inbox.  
indicates that you have read the urgent message.  
indicates that you have new Sprint PCS Picture  
Mail waiting in your inbox.  
indicates that you have new voicemail.  
18  
   
indicates that you have a new text message.  
indicates that the message was sent.  
indicates that the message failed to send.  
indicates that you have a pending message.  
indicates that the message is a draft.  
indicates that there is URL text contained in the  
text message.  
indicates that your Sprint PCS Vision connection  
is active.  
indicates that your Sprint PCS Vision connection  
is dormant or inactive.  
indicates that you are receiving information.  
indicates that you are sending information.  
indicates that your phone is in vibrate all mode.  
indicates that your phone is in ringer+vibrate  
mode.  
indicates that the ringer is set at a level  
between 1-8 or that 1-Beep is selected.  
indicates that the ringer is turned off.  
shows your current battery charge strength.  
(Icon shown fully charged in idle mode and  
completely empty.)  
indicates that position location is active.  
indicates that position location is inactive.  
indicates that the TTY option is on.  
19  
indicates that your phone is roaming.  
indicates that your message is locked.  
indicates that your phone is in web security  
mode.  
indicates that an alarm is set on your phone.  
indicates that a file (ringer, game, screen saver,  
java app, etc.) has been downloaded to your  
phone.  
indicates that the camera is enabled.  
indicates that the camcorder is enabled.  
indicates that the self-timer function is enabled.  
With the self-timer enabled, a set amount of time  
is required prior to taking a picture.  
indicates that the movie light is turned on when  
recording video clips.  
indicates that the white balance has been set to  
Sunny. This is used for taking pictures or movies  
outdoors on bright sunny days.  
indicates that the white balance has been set to  
Cloudy. This is used for taking pictures or  
movies outdoors under cloudy conditions.  
indicates that the white balance has been set to  
Tungsten. This is used for taking pictures or  
movies indoors under normal lighting  
conditions.  
indicates that the white balance has been set to  
Fluorescent. This is used for taking pictures or  
movies indoors under fluorescent lighting  
conditions.  
20  
indicates that the white balance has been set to  
Manual. This is used for taking pictures indoors  
or outdoors using your own custom settings.  
select to start recording a video or voice memo.  
indicates that a video or voice memo has been  
paused.  
indicates that a video or voice memo is playing.  
indicates that a picture has been assigned a  
function. An example may be Picture ID, Screen  
Saver, or Incoming Call.  
indicates that media has been uploaded to an  
online album or folder.  
indicates that there is a voice message attached  
to an image or video clip.  
indicates that the image or video clip has been  
saved to the phone.  
21  
Features of Your Sprint PCS Phone  
Congratulations on the purchase of your Sprint PCS Phone.  
The Sprint PCS Vision Multimedia Phone MM-A880 by  
Samsung is lightweight, easy-to-use, and reliable, and it also  
offers many significant features and service options. The  
following list previews some of those features and provides  
page numbers where you can find out more:  
Digital dual-band capability allows you to make and  
receive calls while on the Sprint Nationwide PCS  
Network and to roam on other 1900 and 800 MHz  
digital networks where Sprint has implemented  
roaming agreements (page 85).  
Built-in 1.03 Megapixel Camera with up to five zoom  
Supports PictBridge technology to print pictures on a  
photo printer directly from your phone (page 181).  
Media Player allows you to play various types of music  
files (page 199).  
Missed events displayed on-screen in standby mode  
Sprint PCS VisionSM provides access to the wireless  
Internet in digital mode (page 231).  
Sprint PCS Mail and SMS Text Messaging provide quick  
and convenient messaging capabilities (page 240 and  
page 222, respectively).  
Sprint PCS Voice CommandSM lets you dial phone  
numbers by speaking someone’s name or the digits of  
their phone number (page 257).  
22  
 
3D Games, ringers, screen savers, and other  
applications can be downloaded to make your Sprint  
PCS Phone as unique as you are (page 245). Additional  
charges may apply.  
The Contact List allows you to store up to 500 phone  
numbers or email addresses (page 119).  
The built-in Calendar offers several personal  
information management features to help you manage  
your busy lifestyle (page 131).  
Your Sprint PCS Phone is equipped with a Location  
feature for use in connection with location-based  
services that may be available in the future (page 62).  
Features large color screen.  
Speed dial lets you dial phone numbers with one or  
two key presses (page 41).  
23  
Turning Your Phone On and Off  
Turning Your Phone On  
To turn your phone on:  
Flip the phone open, then press and release  
.
Once your phone is on, it may display “Looking for  
Service,” which indicates that your phone is searching for a  
signal. When your phone finds a signal, it automatically  
enters standby mode – the phone’s idle state. At this point,  
you are ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of  
searching, a Power Save feature is automatically activated.  
When a signal is found, your phone automatically returns to  
standby mode.  
In Power Save mode, your phone searches for a signal  
periodically without your intervention. You can also  
initiate a search for Sprint PCS Service by pressing any key  
(when your phone is turned on).  
The Power Save feature helps to conserve your battery  
power when you are in an area where there is no signal.  
Note:  
Turning Your Phone Off  
To turn your phone off:  
Press and hold  
until you see the powering down  
animation on the display screen.  
Your screen remains blank while your phone is off (unless  
the battery is charging).  
24  
   
Using Your Phone’s Battery and Charger  
Battery Capacity  
Your Sprint PCS Phone is equipped with a Lithium Ion  
(Li-Ion) battery. The standard battery provides up to 3.3  
hours of continuous digital talk time and the extended  
battery provides up to 5 hours of continuous digital talk  
time.  
When the battery reaches 5% of its capacity, the battery  
icon blinks. When there are approximately two minutes of  
talk time left, the phone sounds an audible alert and then  
powers down.  
Long backlight settings, searching for service, vibrate  
mode, and browser use affect the battery talk and standby  
times.  
Note:  
Be sure to watch your phone’s battery level indicator and  
charge the battery before it runs out of power.  
Tip:  
25  
     
Installing the Battery  
To install the Li-Ion battery:  
1. To install, insert the battery into the bottom of the  
phone at a 45-degree angle, making sure to line up  
the tabs.  
2. Gently press down the top of the battery until it  
snaps into place.  
26  
 
Removing the Battery  
To remove your battery:  
1. Make sure the power is off so that you don’t lose any  
stored numbers or messages.  
2. Push the release button up located at the top of the  
battery.  
3. Pull the battery away and remove from the phone at a  
45-degree angle.  
27  
Charging the Battery  
Your Sprint PCS Phone’s Li-Ion battery is rechargeable and  
should be charged as soon as possible so you can begin  
using your phone.  
Keeping track of your battery’s charge is important. If your  
battery level becomes too low, your phone automatically  
turns off and you will lose all the information you were just  
working on. For a quick check of your phone’s battery  
level, glance at the battery charge indicator located in the  
upper-right corner of your phone’s display screen. If the  
battery charge is getting too low, the battery icon  
blinks and the phone sounds a warning tone.  
Always use a Sprint-approved battery charger, travel  
charger, or vehicle power adapter to charge your battery.  
Using the wrong battery charger could cause damage  
to your phone and void the warranty.  
Warning!  
28  
 
Using the Charger  
To use the travel charger provided with your phone:  
Plug the round end of the AC adapter into the  
phone’s power interface connector and the other end  
into an electrical outlet.  
A red indicator light on the phone lets you know the  
battery is charging.  
An on-screen indicator lets you know that the  
battery is charged.  
It takes approximately 4 hours to fully recharge a  
completely rundown battery. With the Sprint-approved Li-  
Ion battery, you can recharge the battery before it becomes  
completely run down.  
Displaying Your Phone Number  
Just in case you forget your phone number, your Sprint PCS  
Phone can remind you.  
To display your phone number:  
Press Menu (  
) to access the main menu, select  
), Phone Info ( ), and Phone Number  
Settings (  
(
). (Your phone number and other information  
about your phone and account will be displayed.)  
29  
     
Making and Answering Calls  
Making Calls  
Placing a call from your Sprint PCS Phone is as easy as  
making a call from any land line phone. Just enter the  
number and press  
calls.  
, and you’re on your way to clear  
To make a call using your keypad:  
1. Make sure your phone is on.  
2. Enter a phone number. (If you make a mistake while  
dialing, press  
and hold  
to erase one digit at a time. Press  
to erase the entire number.)  
3. Press  
. (To make a call when you are roaming and  
and then . See  
Call Guard is enabled, press  
4. Press or close the phone when you are finished.  
You can also place calls from your Sprint PCS Phone by  
using Sprint PCS Voice CommandSM (page 257), Speed  
Dialing numbers from your Contact List (page 41), using  
your Call History listings (page 114), and using Voice-  
30  
     
Dialing Options  
When you enter numbers in standby mode, a number of  
options are available to you. Press Options (  
) to  
perform the following actions:  
Send Msg: allows you to send a text, pictures, or video  
messages with attachments to the number being dialed.  
Dial: dials the number or digits displayed.  
Save: Enter a seven to ten digit number (phone number  
and area code) and press  
to save the phone  
number in your Contact List. (See “Saving a Phone  
Find: Enter three or more digits and press  
(Options). Select Find to display Contact List entries that  
contain the entered numbers. (See “Finding a Phone  
Hard Pause: allows you to enter a hard pause. To  
continue dialing, you must press a key. (See Dialing and  
2sec Pause: allows you to enter a 2 second pause that  
will automatically begin dialing without any additional  
keys being pressed. (See Dialing and Saving Phone  
31  
   
Answering Calls  
To answer an incoming call:  
1. Make sure your phone is on. (If your phone is off,  
incoming calls go to voicemail.)  
2. Press  
to answer an incoming call. (Depending on  
your phone’s settings, you may also answer incoming  
calls by opening the flip or by pressing any number  
information.)  
Your Sprint PCS Phone notifies you of incoming calls in the  
following ways:  
The phone rings and vibrates.  
The phone just vibrates.  
The indicator light flashes.  
The backlight illuminates.  
The screen displays an incoming call message.  
If the incoming call is from a number stored in your  
Contacts, the entry’s name is displayed on the inside LCD  
screen, and the number is displayed on the outside LCD  
screen.  
If Call Answer is set to Talk Key, the following options are  
also displayed. To select an option, press the corresponding  
softkey button.  
Answer to answer the incoming call.  
Ignore to send the call to your voicemail box.  
32  
   
Answering a Roam Call With Call Guard Enabled  
Call Guard is an option that helps you manage your  
roaming charges when making or receiving calls while  
outside the Sprint Nationwide PCS Network. Please see  
Section 2D: Controlling Your Roaming Experience for  
more information about roaming.  
To answer a call when you are roaming and Call Guard is  
enabled:  
Select Answer to answer the call and press  
to  
confirm the roaming rate. (See “Call Guard” on page  
89 for additional information.)  
When your phone is off, incoming calls go directly to  
voicemail.  
Note:  
Ending a Call  
To disconnect a call when you are finished:  
Close the flip or press  
.
Missed Call Notification  
When an incoming call is not answered, the Missed Call log  
is displayed on your screen.  
To display the Missed Call entry from the notification screen:  
Highlight the entry and press  
number, press .)  
. (To dial the phone  
33  
 
To display a Missed Call entry from standby mode:  
1. Press for Menu.  
2. Highlight Call History and press  
3. Press for Missed Calls.  
.
4. Highlight the entry you wish to view and press  
.
Calling Emergency Numbers  
You can place calls to 911 (dial  
), even if your phone is locked or your account is  
restricted.  
and press  
In-Call Options  
Pressing Options (  
) during a call displays a list of  
features you may use during the course of a call. To select  
an option, press the corresponding keypad number or  
highlight the option and press  
. The following options  
are available through the Options menu:  
(1) Speaker On allows you to turn on or off the speaker  
phone during a call.  
(2) Key Mute or Key UnMute allows you to mute the key  
tones on your phone so the other caller cannot hear  
you pressing any keys on your handset.  
(3) Contacts accesses the Contacts menu.  
(4) Messaging allows you to check for voicemail,  
Sprint PCS Picture Mail, email, and notifications.  
(5) 3-Way Call allows you to talk to two different people  
at the same time. (For more information, See “Making a  
34  
   
(6) Call History checks your call log for Outgoing,  
Incoming, Missed, and All Recent calls. You can also  
erase the logs from this menu.  
(7) Voice Memo allows you to record incoming audio  
from your conversation. (For more information, See  
(8) Tools accesses the Tools menu options.  
(9) Phone Info displays the following menu:  
(1) Phone Number  
(2) Icon Glossary  
(3) Version  
(4) Advanced  
During a call, the left softkey button functions as the Mute  
button. Press it to mute the phone’s microphone for privacy.  
Press it again to Unmute the phone.  
End-of-Call Options  
After receiving a call from or making a call to a phone  
number that is not in your Contacts, the phone number  
and the duration of the call are displayed. The left softkey  
displays the Save option. Select this option if you wish to  
add the new number to your Contacts. (See “Saving a  
After receiving a call from or making a call to a phone  
number that is already in your Contacts, the Contacts entry  
name and phone number and the duration of the call are  
displayed. The left softkey displays the option Call. Select  
this option if you wish to call the number again  
.
The End-of-Call options are not displayed for calls  
identified as No ID or Restricted.  
Note:  
35  
 
Saving a Phone Number  
Your Sprint PCS Phone can store up to 500 Contacts  
entries. Each entry’s name can contain 20 characters. Your  
phone automatically sorts the Contacts entries  
alphabetically. (For more information, see Section 2G:  
To save a number from standby mode:  
1. Enter a phone number and press  
.
2. Select New Entry or Existing Entry and press  
.
The New Entry screen does not display for the first entry  
saved into the contacts. Skip to step 3 if you are entering  
the first number in the contacts.  
Note:  
Note:  
If Existing Entry was selected, press OK to launch the Find  
screen. Locate the desired contact and add the additional  
number to the selected entry.  
3. Use your navigation key to select a label (Mobile,  
Home, Work, Pager, or Others) and press  
.
4. Enter a name for the entry using the numeric keys.  
Press to select the desired entry method  
T9(English), Alpha, Symbol, or Number. See “Entering  
5. When finished entering the name, press  
to  
return to the contact entry.  
6. Press  
for Done to save the entry.  
36  
 
Finding a Phone Number  
You can search Contacts entries for phone numbers that  
end in a specific string of numbers.  
To find a phone number:  
1. While in standby mode, enter three or more of the  
last digits of the phone number. (The more numbers  
you enter, the more specific the search becomes.)  
2. Press  
for Options and select Find. (All Contacts  
entries matching the entered numbers will display.)  
3. To display the Contacts entry that contains the phone  
number you entered, highlight the entry and press  
. To dial the number, press  
.
37  
   
Dialing and Saving Phone Numbers  
With Pauses  
You can dial or save phone numbers with pauses for use  
with automated systems, such as voicemail or credit card  
billing numbers.  
There are two types of pauses available on your phone:  
Hard Pause sends the next set of numbers when you  
press  
.
2sec Pause automatically sends the next set of numbers  
after two seconds.  
You can have multiple pauses in a phone number and  
combine 2-second and hard pauses.  
Note:  
To dial or save phone numbers with pauses:  
1. Enter the phone number.  
2. Select Options (  
) and choose either Hard Pause or  
2sec Pause.  
3. Enter additional numbers.  
4. Press  
– or –  
Press  
to save the number in your Contacts.  
When dialing a number with a hard pause, press Talk to  
send the next set of numbers.  
Note  
38  
   
Abbreviated Dialing  
Abbreviated dialing allows you to program a five or six-  
digit prefix for commonly used phone numbers. When  
abbreviated dialing is on, you can enter the last four or five  
digits of any phone number that matches the five or six  
digit prefix, and the number is dialed.  
To set up abbreviated dialing:  
1. Press  
for Menu.  
).  
2. Select Settings (  
3. Press  
4. Press  
5. Press  
for Others.  
for Call Setup.  
for Abbrev. Dial.  
6. Press the navigation key up or down to select On or  
Off and press  
.
7. Input the five or six digit prefix and press  
to  
Save.  
39  
   
Making an Abbreviated Dial Call  
To make a call:  
1. Enter the last four or five digits of the prefix phone  
number.  
2. Abbrev. Dial is displayed in the lower left corner with  
the prefix digits displayed.  
If there is more than one Contact entry that matches the  
last four or five digits, a list is displayed which allows you to  
select the desired number to call.  
Note  
3. Press  
to begin the call.  
Dialing From Contacts  
To dial directly from a Contacts entry:  
1. Press  
for Contacts.  
2. Enter the first few letters of the Contact name using  
the numeric keypad.  
3. The matching contact is automatically highlighted.  
4. Press  
to make the call.  
If the desired entry contains more than one phone number,  
scroll left or right to display the icon for the number you  
wish to call and press TALK to make the call.  
Note  
40  
   
Using One-Touch/Two-Touch Speed Dialing  
You can store up to ninety-nine numbers in your phone’s  
speed dial memory to make contacting friends and family  
as easy as pressing a button or two. With this feature, you  
can dial Speed Dial entries using one key press for  
locations 2-9 or two key presses for locations 10-99.  
To use One-Touch Dialing for Speed Dial locations 2-9:  
Press and hold the appropriate key for approximately  
two seconds. The display confirms that the number  
has been dialed when it shows the time and counter  
above the name and number of the contact entry.  
To use Two-Touch Dialing for Speed Dial locations 10-99:  
1. Press the first digit.  
2. Press and hold the second digit for approximately  
two seconds. The display confirms that the number  
has been dialed when it shows the time and counter  
above the name and number of the contact entry.  
Speed dialing is not available when you are roaming; when  
you are roaming off the Sprint Nationwide PCS Network,  
you must always dial using eleven digits (1 + area code +  
number).  
Note:  
Speed dialing entries are assigned by pressing Menu, 9, 4.  
Tip:  
41  
     
Using Plus (+) Code Dialing  
When placing calls within the United States you can  
automatically use Plus Code Dialing to enter 011 for  
international calls.  
To make a call using Plus Code Dialing:  
1. Press and hold  
until a “+” sign displays on your  
phone.  
2. Dial the country code and phone number you’re  
calling and press . (The access code for  
international dialing will automatically be dialed,  
followed by the country code and the phone number  
you entered.)  
42  
   
Entering Text  
Selecting a Character Input Mode  
Your Sprint PCS Phone provides convenient ways to enter  
words, letters, punctuation, and numbers whenever you  
are prompted to enter text (for example, when adding a  
Contacts entry or when using Sprint PCS Mail and  
SMS Text Messaging).  
To change the character input mode:  
1. When you are prompted to enter text, press  
to  
change the character input mode.  
2. Select one of the following options:  
T9 (English) to enter characters using predictive T9  
Alpha to enter characters by tapping the keypad  
Symbol to enter symbols (see page 46).  
Number to enter numbers by pressing the  
numbers on the keypad (see page 46).  
Preset Msg to enter pre-programmed messages  
Recent Msg to select text from a list of recent  
messages.  
Emoticons to enter “emoticons” (see page 47).  
When entering text, press the * (Shift) key to change letter  
capitalization (ABC > abc > Abc).  
Tip:  
43  
       
Entering Characters Using T9 Text Input  
T9 Text Input lets you enter text in your Sprint PCS Vision  
Phone by pressing keys just once per letter. (To select the  
T9 (English) mode when entering text, See “Selecting a  
T9 Text Input analyzes the letters you enter using an  
intuitive word database and creates a suitable word. (The  
word may change as you type.) If the word you want does  
not display after you have entered all the letters, press  
to scroll through additional word selections. To accept a  
word and insert a space, press  
.
If you make a mistake, press to erase a single character.  
Press and hold  
to delete an entire entry.  
To enter text using T9:  
1. From the text entry screen (for example, a new event  
in scheduler), press and select T9(English).  
2. Use your keypad to enter the new event. (For  
example, to enter “Meeting”, press once,  
twice, once, once, once, and  
once.)  
44  
 
Entering Characters by Tapping the Keypad  
To enter characters by tapping the keypad:  
1. Select the Alpha mode (See “Selecting a Character  
2. Press the corresponding keys repeatedly until the  
desired letter appears (for example, to enter the word  
“Bill,press  
times, press  
twice,  
three times,  
three  
to advance the cursor or wait for it  
to advance automatically,  
you make a mistake, press  
character. Press and hold  
three times again). (If  
to erase a single  
to erase all text.  
By default, the first letter of an entry is capitalized and the  
following letters are lowercase. After a character is  
entered, the cursor automatically advances to the next  
space after two seconds or when you enter a character on  
a different key.  
45  
   
Characters scroll in the following order:  
. ,@ 1 ?! * # /  
A B C 2  
D E F 3  
G H I 4  
J K L 5  
M N O 6  
P Q R S 7  
T U V 8  
W X Y Z 9  
0
Space  
Shift  
Entering Numbers, Symbols, Emoticons, Preset  
Messages and Recent Messages  
To enter numbers:  
Select the Number mode and press the appropriate  
To enter symbols:  
Select the Symbols mode. (See “Selecting a Character  
Input Mode” on page 43.) To enter a symbol, press  
the appropriate key indicated on the display.  
46  
     
To enter emoticons:  
Select the Emoticons mode and press the appropriate  
key. You may scroll through more options by pressing  
the navigation key up or down. (See “Selecting a  
To enter preset messages:  
1. Select the Preset Msg mode. (See “Selecting a  
2. Scroll to the desired pre-programmed message and  
press  
.
Preset messages make composing text messages even  
easier by allowing you to enter common messages, such as  
Meet me at, Lets get lunch, or a customized preset  
messages of your own. (For more information on Preset  
Note:  
To enter recent messages:  
1. Select the Recent Msg mode. (See “Selecting a  
2. Scroll to the desired message and press  
.
47  
           
48  
Section 2B  
Controlling Your Phone’s Settings  
In This Section  
Using the menu options available on your Sprint PCS Phone, you  
can customize your phone to sound, look, and operate just the  
way you want it to. This section describes how you can  
change your phone’s settings to best suit your needs. Take  
a few moments to review these options and to adjust or  
add settings that are right for you.  
49  
     
Sound Settings  
Ringer Types  
Ringer types help you identify incoming calls and  
messages. You can assign ringer types to individual contact  
entries, types of calls, Scheduler entries, and types of  
messages.  
Single Tones are non-polyphonic traditional style ring  
tones.  
Ring Tones include a variety of standard ringer types.  
Melodies includes a variety of standard musical  
melodies.  
Downloaded Ringers can be downloaded right to your  
My Video are video clips that are stored in your phone.  
50  
       
Selecting Ringer Types for Voice Calls  
Your Sprint PCS Phone provides a variety of ringer options  
that allow you to customize your ring and volume settings.  
These options allow you to identify incoming calls by the  
ring.  
To select a ringer type for voice calls:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Sounds (  
).  
).  
4. Select Ringer Type (  
5. Select Voice Calls (  
6. Select With Caller ID (  
).  
).  
) or No Caller ID (  
).  
7. Press the navigation key up or down to select the  
desired ringer category and press  
.
8. Use your navigation key up or down to scroll through  
the available ringers. (A sample ringer will sound as  
you highlight each option.)  
9. When the desired ringer is selected, press  
.
51  
Selecting Ringer Types for Messages  
To select a ringer type for messages:  
1. Press Menu (  
) to access the main menu.  
).  
).  
2. Select Settings (  
3. Select Sounds (  
4. Select Ringer Type (  
5. Select Messages (  
).  
)
6. Select Voicemail (  
), Text Message (  
), or Picture  
Mail (  
7. Press the navigation key up or down to select the  
desired ringer category and press  
).  
.
8. Use your navigation key up or down to scroll through  
the available ringers. (A sample ringer will sound as  
you highlight each option.)  
9. When the desired ringer is selected, press  
.
52  
Selecting Ringer Types for Schedule  
To select a ringer type for messages:  
1. Press Menu (  
) to access the main menu.  
).  
).  
2. Select Settings (  
3. Select Sounds (  
4. Select Ringer Type (  
5. Select Schedule (  
).  
)
6. Press the navigation key up or down to select the  
desired ringer category and press  
.
7. Use your navigation key up or down to scroll through  
the available ringers. (A sample ringer will sound as  
you highlight each option.)  
8. When the desired ringer is selected, press  
.
Selecting a Roam Ringer  
To select a ringer type for messages:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Sounds (  
).  
).  
4. Select Ringer Type (  
).  
5. Select Roam Ringer (  
)
6. Press the navigation key up or down to select Normal  
or Distinctive and press  
.
53  
Selecting a Key Tone  
Your phone offers a number of options for selecting the  
type and length of audible tones accompanying a key  
press. (Longer tone lengths may be better for tone  
recognition when dialing voicemail or other automated  
systems.)  
To select a tone level:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Sounds (  
).  
).  
4. Select Key Tone Level (  
).  
5. Press the volume key up or down to select the  
desired level and press  
.
To select a key tone length:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Sounds (  
).  
).  
4. Select Tone Length (  
).  
5. Select Short or Long and press  
.
54  
   
Adjusting the Phone’s Volume Settings  
You can adjust your phone’s volume settings to suit your  
needs and your environment.  
To adjust your phone’s volume settings:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Sounds (  
4. Select Volume (  
5. Select Ringer (  
).  
).  
).  
), Text Message (  
), Picture Mail  
), or  
(
), Voice Mail (  
App. Volume ( ).  
6. Press the navigation key left or right to choose a  
desired volume level and press  
), Alarms (  
.
You can adjust the ringer volume in standby mode (or the  
earpiece volume during a call) by using the volume key on  
the left side of your phone.  
Tip:  
55  
   
Alert Notification  
Your Sprint PCS Phone can alert you with an audible tone  
when you change service areas, once a minute during a  
voice call, or when a call has been connected.  
To enable or disable alert sounds:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Sounds (  
4. Select Alerts (  
).  
).  
).  
5. Select Minute Beep (  
), Sig. Fade Tone (  
), Service (  
), Connect  
(
), or Power On/Off (  
).  
6. Select On or Off and press  
.
Silence All  
There may be times when you need to silence your phone  
entirely. The phone’s Silence All option allows you to mute  
all sounds without turning your phone off.  
To activate Silence All:  
With the phone open, press and hold the volume key  
down in standby mode. (The screen will display  
“Silence All.”)  
To deactivate Silence All:  
Press the volume key up repeatedly to select a desired  
volume level.  
56  
       
Display Settings  
Changing the Text Greeting  
The text greeting can be up to fourteen characters and is  
displayed on your phone’s screen in standby mode. You  
may choose to keep the phone’s default greeting  
(“Sprint PCS”), or you may enter your own custom  
greeting.  
To display or change your greeting:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Display (  
4. Select Greeting (  
).  
).  
).  
5. Select Custom and press  
.
6. Enter a custom greeting using your keypad and press  
existing greeting one character at a time, press  
. To erase the entire greeting, press and  
hold  
.)  
57  
       
Changing the Backlight Time Length  
The backlight setting lets you select how long the display  
screen and keypad are lit after any key press is made.  
To change the backlight setting:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Display (  
4. Select Backlight (  
).  
).  
).  
5. Select Main Display (  
Mode ( ).  
6. Select a time setting or on/off and press  
), Keypad (  
), or Pwr Save  
.
Long backlight settings affect the battery’s talk and standby  
times.  
Note:  
Changing the Screen Saver  
Your new Sprint PCS Phone offers options for what you  
see on the display screen while in standby mode.  
To change the display images:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Display (  
).  
).  
4. Select Screen Saver (  
).  
5. Select Main LCD (  
) or Sub LCD (  
).  
58  
       
6. Select Preset Images, Downloads, My Pictures, or  
My Videos and press  
.
7. Press the navigation key left or right to view the  
available screen savers.  
8. Press  
to select the desired screen saver.  
Setting the Foreground Image  
A foreground image can be used to display a calendar,  
clock, or other images on top of the background image.  
To select a foreground image:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Display (  
).  
).  
4. Select Set Foreground (  
5. Press the navigation key left or right to select the  
desired image and press  
).  
.
Changing the Phone’s Menu Style  
Your Sprint PCS Phone allows you to choose how the  
menu appears on your display screen.  
To select the display’s menu style:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Display (  
4. Select Menu Style (  
).  
).  
).  
59  
         
5. Press the navigation key left or right to select 3x3 Style  
or List Style and press  
.
Dialing Font  
Your Sprint PCS Phone allows you to choose the color and  
size of the text displayed when dialing.  
Font Size  
The available color options are:  
Large: displays larger text for easier viewing on the  
display screen.  
Normal: displays the standard smaller size text on the  
display screen.  
To change the dialing font size:  
1. Press Menu (  
) to access the main menu.  
).  
).  
2. Select Settings (  
3. Select Display (  
4. Select Dialing Font (  
).  
5. Select Size (  
6. Press the navigation key up or down to select Large or  
Normal and press  
).  
.
60  
   
Color  
The available color options are:  
Basic: displays black numbers on-screen when dialing.  
Rainbow: displays multi-colored numbers on-screen  
when dialing.  
Monochrome: allows you to choose between several  
different monochromatic color options.  
Hyphenate: allows you to choose between several  
different monochromatic colors and assign a different  
color option to each individual hyphenated series of  
numbers.  
To change the dialing color:  
1. Press Menu (  
) to access the main menu.  
).  
).  
2. Select Settings (  
3. Select Display (  
4. Select Dialing Font (  
).  
5. Select Color (  
6. Select Basic, Rainbow, Monochrome, or Hyphenate and  
press  
7. Select Done (  
).  
.
).  
61  
Location Settings  
Your Sprint PCS Phone is equipped with a Location feature  
for use in connection with location-based services that may  
be available in the future.  
The Location feature allows the network to detect your  
position. Turning Location off will hide your location from  
everyone except 911.  
To enable your phone’s Location feature:  
1. Press Menu (  
2. Select Settings (  
3. Select Others (  
) to access the main menu.  
).  
).  
4. Select Location (  
). (The Location disclaimer  
displays.)  
5. Read the disclaimer and press  
6. Select On or Off press  
When the Location feature is on, your phone’s standby  
.
.
screen will display the  
icon. When Location is turned  
off, the icon will display.  
62  
   
Messaging Settings  
Staying connected to your friends and family has never  
been easier. With your phone’s advanced messaging  
capabilities, you can send and receive many different kinds  
of text messages without placing a voice call. (For more  
Your phone’s messaging settings make text messaging  
even faster and easier by letting you decide how you  
would like to be notified of new messages, create a  
signature with each sent message, and create your own  
canned messages, to name just a few.  
Setting Message Alerts  
When new messages arrive, you can choose to have your  
phone notify you by playing an audible alert.  
To hear an alert when you receive a new message:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Settings (  
).  
).  
4. Select Message Alert (  
5. Select Type ( ).  
6. Select Voicemail (  
Picture Mail ( ).  
7. Select Single Tones, Ring Tones, Melodies, or  
Downloaded and press  
8. Select the desired sound and press  
).  
), Text Message (  
), or  
.
.
63  
     
Deleting Old Messages  
You can have old messages deleted automatically when  
your inbox becomes full.  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Settings (  
4. Select Auto-Erase (  
).  
).  
).  
5. Select Yes or No and press  
.
Adding a Customized Signature  
Each message you send can have a customized signature to  
reflect your personality.  
To add a customized signature to each sent message:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Settings (  
).  
).  
4. Select Edit Signature (  
).  
5. Select On and press  
.
If you do not wish to attach a signature to your outgoing  
messages, select Off.  
Note:  
6. Enter your signature using the keypad and press  
64  
   
Managing Preset Messages  
Your phone is preset with ten messages and ten empty  
spaces for custom messages to help make sending text  
messages faster and easier. These messages, such as “Where  
are you?,” “Let’s get lunch,” and “Meet me at,” can be  
customized or deleted to suit your needs. You can even add  
your own canned messages to the list.  
To edit or delete a canned message:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Settings (  
).  
).  
4. Select Preset Messages (  
). (The list of messages  
is displayed.)  
5. To edit or delete a canned message, highlight it and  
press Edit ( ).  
6. Edit the selected message (see “Entering Text” on  
page 43), and press Done (  
).  
To add a new canned message:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Settings (  
).  
).  
4. Select Preset Messages (  
). (The list of messages  
is displayed.)  
5. Press Options (  
) and select Add New ( ).  
65  
 
6. Enter your canned message (see “Entering Text” on  
page 43), and press Done ( ). (Your new message  
will be added to the beginning of the list.)  
Airplane Mode  
Airplane Mode allows you to use many of your phone’s  
features, such as Games, Memo Pad, Voice Memos, etc.,  
when you are in an airplane or in any other area where  
making or receiving calls or data is prohibited. When your  
phone is in Airplane Mode, it cannot send or receive any  
calls or access online information.  
To set your phone to Airplane Mode:  
1. Press Menu (  
2. Select Settings (  
3. Select Others (  
) to access the main menu.  
).  
).  
4. Select Airplane Mode (  
).  
5. Read the disclaimer and select OK (  
).  
6. Select Off, On, or On Power Up and press  
.
While in Airplane Mode, your phone’s standby screen will  
display “Phone Off.”  
66  
     
TTY Use With Sprint PCS Service  
A TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are  
deaf, hard of hearing, or who have speech or language  
disabilities, to communicate by telephone.  
Your phone is compatible with select TTY devices. Please  
check with the manufacturer of your TTY device to ensure  
that it supports digital wireless transmission. Your phone  
and TTY device will connect via a special cable that plugs  
into your phone's headset jack. If this cable was not  
provided with your TTY device, contact your TTY device  
manufacturer to purchase the connector cable.  
When establishing your Sprint PCS Service, please call  
Sprint Customer Service via the state Telecommunications  
Relay Service (TRS) by first dialing  
,
.
Then provide the state TRS with this number: 866-727-  
4889.  
To turn TTY Mode on or off:  
1. Press Menu (  
2. Select Settings (  
3. Select Others (  
) to access the main menu.  
).  
).  
4. Select TTY Options (  
).  
A message is displayed when you enable TTY that says  
“Enabling TTY may impair headset use and non-TTY  
accessory performance” press the left softkey to continue.  
Note:  
67  
   
5. Press the navigation key up or down to select TTY  
Disable, TTY Full, TTY+Hearing or TTY+Voice and press  
.
In TTY Mode, your phone will display the TTY access icon.  
Note:  
If TTY mode is enabled, the audio quality of non-TTY  
devices connected to the headset jack may be impaired.  
911 Emergency Calling  
IMPORTANT  
NOTICE:  
Sprint recommends that TTY users make  
emergency calls by other means, including  
Telecommunications Relay Services (TRS), analog  
cellular, and land line communications. Wireless  
TTY calls to 911 may be corrupted when received  
by public safety answering points (PSAPs)  
rendering some communications unintelligible. The  
problem encountered appears related to TTY  
equipment or software used by PSAPs. This matter  
has been brought to the attention of the FCC, and  
the wireless industry and PSAP community are  
currently working to resolve this.  
68  
 
Phone Setup Options  
Launch Pad  
Your phone offers you the option of assigning a shortcut  
key to a favorite or often-used function. Pressing one of the  
navigation keys in standby mode will launch your  
personally designated shortcut.  
To assign your shortcut key:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Launch Pad (  
).  
4. Select the Up, Down, Right or Left key, and press  
.
5. Using the navigation key or your keypad, select the  
desired shortcut you would like to assign and  
press  
.
69  
     
Call Answer Mode  
You can determine how to answer incoming calls on your  
phone, whether you want to be required to press  
press any number key, or simply open the flip.  
, to  
To set call answer mode:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Others (  
4. Select Call Setup (  
).  
).  
).  
5. Select Call Answer (  
).  
6. To select an option, highlight it and press  
.
Any Key to allow an incoming call to be answered  
by pressing any key.  
Talk Key requires  
incoming calls.  
to be pressed to answer all  
Flip Open allows you to answer incoming calls by  
opening the flip.  
Auto Answer Mode  
You may set your phone to automatically pick up incoming  
calls when connected to an optional hands-free car kit.  
To set Auto Answer mode:  
1. Press Menu (  
2. Select Settings (  
3. Select Others (  
) to access the main menu.  
).  
).  
70  
       
4. Select Call Setup (  
).  
5. Select Auto Answer (  
).  
6. To select an option, highlight it and press  
.
No to disable Auto Answer.  
Yes to answer calls automatically when the phone  
is connected to a hands-free car kit or a headset  
(sold separately). Remember, your phone will  
answer calls in Auto Answer mode even if you are  
not present.  
Display Language  
You can choose to display your Sprint PCS Phone’s on-  
screen menus in English or in Spanish.  
To assign a language for the phone’s display:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Others (  
4. Select Language (  
).  
).  
).  
5. Select English or Español and press  
.
71  
     
Section 2C  
Setting Your Phone’s Security  
In This Section  
Security Features for Sprint PCS VisionSM  
By using the security settings on your Sprint PCS Phone, you  
receive peace of mind without sacrificing flexibility. This  
section will familiarize you with your phone’s security  
settings. With several options available, you can customize  
your phone to meet your personal needs.  
73  
     
Accessing the Security Menu  
All of your phone’s security settings are available through  
the Security menu. You must enter your lock code to view  
the Security menu.  
To access the Security menu:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
).  
4. Enter your lock code to display the Security menu.  
If you can’t recall your lock code, try using the last four  
digits of either your Social Security number or Sprint PCS  
Phone number or try 0000 or NATL(6285). If none of these  
work, call Sprint Customer Service at 1-888-211-4PCS  
(4727).  
Tip:  
Using Your Phone’s Lock Feature  
Locking Your Phone  
When your phone is locked, you can only receive  
incoming calls or make calls to 911, Sprint Customer  
Service, or special numbers. (See “Using Special Numbers”  
To lock your phone:  
1. From the Security menu, select Lock Phone (  
2. Highlight Lock Now and press . (To set your  
phone to lock the next time it is turned on, select On  
Power-Up and press  
).  
.
74  
         
Unlocking Your Phone  
To unlock your phone:  
1. From standby mode, press  
.
2. Enter your lock code.  
Changing the Lock Code  
To change your lock code:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
).  
4. Enter your lock code. (The Security menu is  
displayed.)  
5. Select Change Lock (  
).  
6. Enter your new lock code and press Next (  
).  
).  
7. Re-enter your new lock code press Done (  
Calling in Lock Mode  
You can place calls to 911 and to your special numbers  
when in lock mode. (For information on special numbers,  
To place an outgoing call in lock mode:  
To call an emergency number, special number, or  
Sprint Customer Service, enter the phone number  
and press  
.
75  
         
Lock Pic/Video  
When your pictures or videos are locked you are unable to  
access the camera or camcorder to take pictures or videos  
without first entering a password. You are required to  
enter a password prior to accessing the Picture & Video  
menu.  
Locking Pic/Video  
To lock your picture & video menu:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
) and enter your lock code.  
4. Select Lock Pic/Video (  
).  
5. Select On/Off and press  
.
Accessing the Pic/Video Menu in Lock Mode  
To access the pic/video menu:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Picture & Video (  
3. Enter your lock code. (The Picture & Video menu is  
displayed.)  
76  
       
Lock Services  
This setting allows you to lock voice call functions and  
Sprint PCS Vision services. When you enable Lock  
Services, you are unable to make new calls (excluding  
emergency numbers) or access the Sprint PCS Vision  
services until the lock has been disabled in the Security  
menu.  
Locking Voice Services  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
) and enter your lock code.  
4. Select Lock Services (  
5. Select Voice ( ).  
).  
6. Select Lock and press  
.
Locking PCS Vision  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
) and enter your lock code.  
4. Select Lock Services (  
5. Select PCS Vision (  
6. Select Lock and press  
).  
).  
.
77  
       
Using Special Numbers  
Special numbers are important numbers that you have  
designated as being “always available.You can call and  
receive calls from special numbers even if your phone is  
locked.  
You can save up to three special numbers in addition to  
your Contacts entries (the same number may be in both  
directories).  
To add or replace a special number:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Security (  
) and enter your lock code.  
).  
4. Select Special # (  
5. Highlight the desired location for your entry and  
press  
6. Enter the number and press  
.
.
There are no Speed Dial options associated with special  
numbers.  
Note:  
78  
   
Erasing Contacts  
You can quickly and easily erase all of your Contacts.  
To erase all the names and phone numbers in your  
Contacts:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Security (  
) and enter your lock code.  
4. Select Erase Contacts (  
).  
5. If you are certain you would like to erase all of your  
internal Contacts entries, select Yes and press  
.
79  
   
Erasing Downloads  
You can use your phone’s security menu to erase all items  
you have downloaded to your phone.  
To erase all downloads:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Security (  
) and enter your lock code.  
4. Select Erase Downloads (  
).  
5. If you are certain that you would like to erase all  
items downloaded to your phone, select Yes and  
press  
.
This will also delete any content originally preloaded into  
the handset.  
Note:  
80  
   
Erase Pictures and Video  
You can use your phone’s security menu to erase all  
pictures and videos saved to your phone.  
To erase all pictures and videos:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Security (  
) and enter your lock code.  
4. Select Erase Pic/Video (  
).  
5. If you are certain that you would like to erase all  
pictures and videos saved in your phone, select Yes  
and press  
.
81  
   
Resetting Your Phone  
Resetting the phone restores all the factory defaults,  
including the ringer types and display settings. (Contacts,  
are not erased.)  
To reset your phone:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
) and enter your lock code.  
4. Select Reset Phone (  
).  
5. If you are certain that you would like to restore all of  
the factory settings, select Yes and press (  
).  
Reset Picture & Video Account  
It is sometimes necessary to clear the token associated  
with the Picture & Video account in Sprint PCS Vision.  
This will reset your account.  
To reset your picture & video account:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Security (  
).  
) and enter your lock code.  
4. Select Reset Pic/Video Account (  
).  
5. If you are certain that you would like to reset your  
Picture & Video account, select Yes and press  
.
82  
       
Security Features for Sprint PCS VisionSM  
Enabling and Disabling Sprint PCS Vision  
Services  
You can disable Sprint PCS Vision services without turning  
off your phone; however, you will not have access to any  
Sprint PCS Vision services, including Web and messaging.  
Disabling Sprint PCS Vision will avoid any charges  
associated with Sprint PCS Vision services. While signed  
out, you can still place or receive phone calls, check  
voicemail, and use other voice services. You may enable  
Sprint PCS Vision services again at any time.  
To disable Sprint PCS Vision services:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Sprint PCS Vision (  
).  
4. Select Disable Vision (  
). (A message will appear.)  
5. Read the disclaimer and press Next (  
6. Select Disable Vision and press  
).  
.
83  
     
To enable Sprint PCS Vision services:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Sprint PCS Vision (  
4. Select Enable Vision (  
).  
). (A message will appear.)  
.
5. Select Connect and press  
6. Select Yes to enable Vision service and press  
.
84  
 
Section 2D  
Controlling Your Roaming Experience  
In This Section  
Understanding Roaming  
Setting Your Phone’s Roam Mode  
Controlling Roaming Charges Using Call Guard  
Roaming is the ability to make or receive calls when you’re off  
the Sprint Nationwide PCS Network. Your new Sprint PCS  
VisionSM Multimedia Phone MM-A880 by Samsung by  
Samsung works anywhere on the Sprint Nationwide PCS  
Network and allows you to roam on other 1900 and 800  
MHz digital networks where we've implemented roaming  
agreements with other carriers.  
This section explains how roaming works as well as special  
features that let you manage your roaming experience.  
85  
       
Understanding Roaming  
Recognizing the Roaming Icon on the Display Screen  
Your phone’s display screen always lets you know when  
you’re off the Sprint Nationwide PCS Network. Any time  
you are roaming, the phone displays the roaming  
icon ( ).  
Remember, when you are using your phone off the Sprint  
Nationwide PCS Network, always dial numbers using 11  
digits (1 + area code + number).  
Tip:  
Unless your Sprint PCS Service Plan includes roaming, you  
will pay a higher per-minute rate for roaming calls.  
Note:  
Roaming on Other Digital Networks  
When you’re roaming on digital networks, your call quality  
and security will be similar to the quality you receive when  
making calls on the Sprint Nationwide PCS Network.  
However, you may not be able to access certain features,  
such as Sprint PCS Vision.  
If you’re on a call when you leave the Sprint Nationwide  
PCS Network and enter an area where roaming is  
available, your call is dropped. If your call is dropped in an  
area where you think Sprint PCS Service is available, turn  
your phone off and on again to reconnect to the Sprint  
Nationwide PCS Network.  
Note:  
86  
 
Checking for Voicemail Messages While Roaming  
When you are roaming off the Sprint Nationwide PCS  
Network, you will not receive on-phone notification of  
new voicemail messages. Callers can still leave messages,  
but you will need to periodically check your voicemail for  
new messages if you are in a roaming service area for an  
extended period of time.  
To check your voicemail while roaming:  
1. Dial 1+area code+your Sprint PCS Phone number.  
2. When you hear your voicemail greeting, press  
.
3. Enter your pass code at the prompt and follow the  
voice prompts.  
When you return to the Sprint Nationwide PCS Network,  
voicemail notification will resume as normal.  
87  
Setting Your Phone’s Roam Mode  
Your Sprint PCS Phone allows you to control your roaming  
capabilities. By using the Roaming menu option, you can  
determine which signals your phone accepts.  
Set Mode  
Choose from three different settings on your dual-band  
phone to control your roaming experience.  
To set your phone’s roam mode:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Roaming (  
4. Select Set Mode (  
).  
).  
).  
5. To select an option, highlight it and press  
.
Automatic seeks Sprint PCS Service. When Sprint PCS  
Service is unavailable, the phone searches for an  
alternate system.  
Roaming only forces the phone to seek a roaming  
system. The previous setting (Sprint or Automatic)  
is restored the next time the phone is turned on.  
Sprint allows you to access the enhanced  
Sprint Nationwide PCS Network only and prevents  
roaming on other networks.  
88  
   
Controlling Roaming Charges Using  
Call Guard  
Your phone has two ways of alerting you when you are  
roaming off the Sprint Nationwide PCS Network: the on-  
screen roaming icon and Call Guard. Call Guard makes it  
easy to manage your roaming charges by requiring an extra  
step before you can place or answer a roaming call. (This  
additional step is not required when you make or receive  
calls while on the Sprint Nationwide PCS Network.)  
To turn Call Guard on or off:  
1. Press Menu (  
) to access the main menu.  
2. Select Settings (  
3. Select Roaming (  
4. Select Call Guard (  
).  
).  
).  
5. Highlight On or Off and press  
.
Voice Dialing and Speed Dialing are not available when you  
are roaming with Call Guard enabled.  
Note:  
89  
     
To place roaming calls with Call Guard on:  
1. From standby mode, dial 1 + area code + the seven-  
digit number and press  
.
2. Press to confirm Roaming Rate.  
To answer incoming roaming calls with Call Guard on:  
1. Press  
2. Press  
to confirm Roaming Rate.  
If the Call Guard feature is set to On, you need to  
take extra steps to make and receive roaming calls.  
Reminder:  
90  
 
Section 2E  
Navigating Through Menus  
In This Section  
Every function and feature of your Sprint PCS Phone can be  
accessed through an on-screen menu. This section is a road  
map to using your Sprint PCS VisionSM Multimedia Phone  
MM-A880 by Samsung. Please take a few moments to learn  
your way around and you’ll find your phone easier to use.  
91  
   
Menu Navigation  
The navigation key on your Sprint PCS Phone allows you to  
scroll through menus quickly and easily. The scroll bar at  
the right of the menu keeps track of your position in the  
menu at all times.  
To navigate through a menu, simply press the navigation  
key up or down. If you are in a first-level menu, such as  
Settings, you may also navigate to the next or previous first-  
level menu by pressing the navigation key right or left.  
Menu Structure  
Selecting Menu Items  
As you navigate through the menu, menu options are  
highlighted. Select any numbered option by simply  
pressing the corresponding number on the phone’s  
keypad. You may also select any item by highlighting it and  
pressing  
For example, if you want to view your last incoming call:  
1. Press Menu ( ) to access the main menu.  
2. Select Call History by pressing  
it and pressing  
.
or by highlighting  
.
3. Select Incoming Calls by pressing  
or by  
highlighting it and pressing  
. (If you have  
received any calls, they are displayed on the screen.)  
92  
     
Backing Up Within a Menu  
To go to the previous menu:  
Press  
.
To return to standby mode:  
Press  
.
Viewing the Menus  
Menu Diagram  
Picture & Video  
1: Camera  
Press Options (  
) and press the navigation key left or right to  
display the following options:  
1: Flash  
1: Off  
2: On this shot  
3: Always On  
2: Self-Timer  
1: Off  
2: 5 Seconds  
3: 10 Seconds  
3: Fun Tools  
1: Fun Frames (Only available in Full Screen Mode)  
1: Off  
2: Night  
3: Funny glasses  
4: Wedding  
5: Roses for Love  
6: Cat eyes  
7: Bakery  
8: Stars  
93  
 
9: Play Room  
10: Blue Flowers  
11: Blocks  
2: Color Tones  
1: Auto  
2: Monochrome  
3: Sepia  
4: Green  
5: Aqua  
6: Antique  
7: Cool  
8: Warm  
4: Controls  
1: Brightness  
2: White Balance  
1: Auto  
2: Sunny  
3: Cloudy  
4: Tungsten  
5: Fluorescent  
6: Manual  
5: Settings  
1: Resolution  
1: Best: 1152x864  
2: HI: 640x480  
3: Med: 320x240  
4: Low: 176x216  
2: Quality  
1: Fine  
2: Normal  
3: Economy  
3: Shutter Sound  
1: Off  
2: Shutter 1-3  
3: Say Cheese  
94  
4: Auto-Erase (On/Off)  
1: On  
2: Off  
5: View Mode  
1: Wide Screen  
2: Full Screen  
6: Review Pictures  
7: Camcorder  
2: Camcorder  
Press Options (  
) and press the navigation key left or right  
to display the following options:  
1: Movie Light  
1: Off  
2: On This Movie  
3: Always On  
2: Self-Timer  
1: Off  
2: 5 Seconds  
3: 10 Seconds  
3: Color Tones  
1: Auto  
2: Monochrome  
3: Sepia  
4: Green  
5: Aqua  
6: Antique  
7: Cool  
8: Warm  
4: Controls  
1: Brightness  
2: White Balance  
1: Auto  
2: Sunny  
3: Cloudy  
4: Tungsten  
95  
5: Fluorescent  
6: Manual  
5: Settings  
1: Quality  
1: Fine  
2: Normal  
3: Economy  
2: Auto-Erase (On/Off)  
6: Review Videos  
7: Camera Mode  
3: My Pictures  
1: In Camera  
2: Saved to Phone  
4: My Videos  
1: In Camcorder  
2: Saved to Phone  
5: Online Albums  
1: View Albums  
2: Upload Pictures  
3: Upload Videos  
6: Order Prints  
1: Prints at Retail  
2: Prints by Mail  
7: Pictbridge Print  
8: Settings and Info  
1: Auto Erase (On/Off)  
2: Account Info  
3: Cam. Key Guard  
Messaging  
1: Send Message  
1: Text  
2: Picture  
1: In Camera  
2: New Picture  
3: Video  
96  
1: In Camcorder  
2: New Video  
2: Text Message  
1: Inbox  
2: Outbox  
3: Drafts  
4: Send Text  
3: Picture Mail  
1: Inbox  
2: Send Picture  
3: Send Video  
4: Email  
5: Instant Message  
6: Voicemail  
1: Call Voicemail  
2: Details  
3: Clear Envelope  
7: Settings  
1: Notification  
1: Message & Icon  
2: Icon only  
2: Sending Options  
1: Priority  
1: Normal  
2: Urgent  
2: Call Back #  
1: None  
2: Phone Number (xxx-xxx-xxxx)  
3: Other  
3: Preset Messages  
1: Can’t talk right now. Send me a message.  
2: Call me  
3: Where are you?  
4: Can you pick up  
5: Meet me at  
97  
6: Let’s get lunch.  
7: The meeting has been cancelled.  
8: I’ll be there at  
9: What time does it start?  
10: I love you!  
11: [Empty]  
12: [Empty]  
13: [Empty]  
14: [Empty]  
15: [Empty]  
16: [Empty]  
17: [Empty]  
18: [Empty]  
19: [Empty]  
20: [Empty]  
4: Edit Signature (On/Off)  
5: Message Alert  
1: Volume  
2: Type  
1: Voicemail  
2: Text Message  
3: Picture Mail  
3: Reminder  
1: Off  
2: Once  
3: Every 2 min  
6: Save in Outbox (Yes/No)  
7: Auto-Erase (Yes/No)  
Tools  
1: Voice Service  
2: Voice Memo  
1: Record  
2: Review  
3: Erase All (Yes/No)  
3: Planner  
98  
1: Today  
2: Scheduler  
3: Task List  
4: Countdown  
4: Memo Pad  
5: World Time  
1: DST Setting  
6: Alarm Clock  
1: Alarm #1  
2: Alarm #2  
3: Alarm #3  
7: Calculator  
Media Player  
1: Channel Listing  
1: Launch  
Call History  
1: Outging Calls  
2: Incoming Calls  
3: Missed Calls  
4: All Recent  
Web  
Settings  
1: Display  
1: Screen Saver  
1: Main LCD  
1: Preset Images  
1: Image Gallery 01  
2: Image Gallery 02  
3: Image Gallery 03  
4: Image Gallery 04  
5: Image Gallery 05  
2: Downloads  
1: Images  
2: Videos  
3: My Pictures  
99  
1: In Camera  
2: Saved to Phone  
4: My Videos  
1: In Camcorder  
2: Saved to Phone  
2: Sub LCD  
1: Preset Images  
1: Digital 1  
2: Digital 2  
3: Analog 1  
4: Analog 2  
5: Analog 3  
2: Download  
1: Images  
2: Videos  
3: Picture  
1: In Camera  
2: Saved to Phone  
2: Set Foreground  
1: Large Digital  
2: Small Digital  
3: Dual Clock  
4: Large Analog  
5: None  
6: Calendar  
3: Menu Style  
1: 3x3 Style  
2: List Style  
4: Dialing Font  
1: Color  
1: Basic  
2: Rainbow  
3: Monochrome  
4: Hyphenate  
2: Size  
100  
1: Large  
2: Normal  
5: Incoming Call  
1: With Caller ID  
1: Preset Animation  
2: Downloads  
3: My Pictures  
2: No Caller ID  
1: Preset Animation  
2: Downloads  
3: My Pictures  
6: Greeting  
1: Sprint PCS  
2: Custom  
7: Backlight  
1: Main Display  
1: Flip open  
2: 30 seconds  
3: 15 seconds  
4: 8 seconds  
2: Keypad  
1: Flip open  
2: 30 seconds  
3: 15 seconds  
4: 8 seconds  
5: Off  
3: Pwr Save Mode (On/Off)  
2: Sounds  
1: Volume  
1: Ringer  
2: Text Message  
3: Picture Mail  
4: Voice Mail  
5: Alarms  
6: App. Volume  
101  
2: Ringer Type  
1: Voice Calls  
1: With Caller ID  
2: No Caller ID  
2: Messages  
1: Voicemail  
2: Text Message  
3: Picture Mail  
3: Schedule  
1: Single Tones  
2: Ring Tones  
3: Melodies  
4: Downloaded  
4: Roam Ringer  
1: Normal  
2: Distinctive  
3: Alerts  
1: Minute Beep (On/Off)  
2: Service (On/Off)  
3: Connect (On/Off)  
4: Sig. Fade Tone (On/Off)  
5: Power On/Off (On/Off)  
4: Key Tone Level  
1: Ringer Off  
2: Level 1-8  
5: Tone Length  
1: Short  
2: Long  
3: Sprint PCS Vision  
1: Enable/Disable Vision  
2: Net Guard (On/Off)  
3: Update Profile  
4: Voice Service  
1: Choice Lists  
1: Automatic  
102  
2: Always On  
3: Always Off  
2: Sensitivity  
1: Reject More  
2: Recommended  
3: Reject Less  
3: Digit Dialing  
1: Adapt Digits  
2: Reset Digits  
4: Sound  
1: Prompts (On/Off)  
2: Digits (On/Off)  
3: Names (On/Off)  
4: Name Settings  
1: Speed  
1: Faster  
2: Recommended  
3: Slower  
2: Volume  
1: Louder  
2: Recommended  
3: Softer  
5: Voice Launch  
1: Talk Key  
2: Talk Key and Flip Open  
6: About  
5: Security  
1: Lock Phone  
1: Unlocked  
2: On Power-Up  
3: Lock Now  
2: Lock Pic/Video (On/Off)  
3: Change Lock  
4: Special #  
1: Empty  
103  
2: Empty  
3: Empty  
5: Erase Contacts (Yes/No)  
6: Erase Downloads (Yes/No)  
7: Erase Pic/Video (Yes/No)  
8: Reset Phone (Yes/No)  
9: Reset Pic/Video Account (Yes/No)  
10: Lock Services  
1: Voice: Locked/Unlocked  
2: PCS Vision: Locked/Unlocked  
6: Roaming  
1: Set Mode  
1: Automatic  
2: Roaming only  
3: Sprint  
2: Call Guard (On/Off)  
7: Launch Pad  
1: Up Key  
1: Contacts  
2: Voice Memo  
3: Scheduler  
4: Messaging  
5: Voice Service  
6: Ringer Type  
7: Downloads  
8: Display  
9: Alarms  
10: Calculator  
11: Media Player  
12: Web  
13: Inbox  
14: Send Text  
15: Missed Events  
2: Down Key  
1: Contacts  
104  
2: Voice Memo  
3: Scheduler  
4: Messaging  
5: Voice Service  
6: Ringer Type  
7: Downloads  
8: Display  
9: Alarms  
10: Calculator  
11: Media Player  
12: Web  
13: Inbox  
14: Send Text  
15: Missed Events  
3: Left Key  
1: Contacts  
2: Voice Memo  
3: Scheduler  
4: Messaging  
5: Voice Service  
6: Ringer Type  
7: Downloads  
8: Display  
9: Alarms  
10: Calculator  
11: Media Player  
12: Web  
13: Inbox  
14: Send Text  
15: Missed Events  
4: Right Key  
1: Contacts  
2: Voice Memo  
3: Scheduler  
4: Messaging  
105  
5: Voice Service  
6: Ringer Type  
7: Downloads  
8: Display  
9: Alarms  
10: Calculator  
11: Media Player  
12: Web  
13: Inbox  
14: Send Text  
15: Missed Events  
8: Others  
1: Call Setup  
1: Abbrev. Dial (On/Off)  
2: Contacts Match (On/Off)  
3: Call Answer  
1: Any Key  
2: Talk Key  
3: Flip Open  
4: Auto Answer (Car Kit/Headset) (Yes/No)  
2: Restriction  
1: Outgoing Call  
1: Allow all  
2: Contacts Only  
3: Special# Only  
3: Language  
1: English  
2: Español  
4: Airplane Mode (On/Off/On Power-Up)  
5: Location (On/Off)  
6: Headset Mode  
1: Normal Headset  
2: Headset Only  
7: TTY Options  
1: TTY Disable  
106  
2: TTY Full  
3: TTY+Hearing  
4: TTY+Voice  
8: Time-out  
1: 5 Minutes  
2: 10 Minutes  
3: 20 Minutes  
4: No Time-out  
9: Phone Info  
1: Phone Number  
2: Icon Glossary  
3: Version  
4: Advanced  
Downloads  
1: Games  
1: Get New Games  
2: My Content Manager Games  
3: Ms. PAC-MAN DEMO  
2: Ringers  
1: Get New Ringers  
2: My Content Manager Ringers  
3: Screen Savers  
1: Get New Screen Savers  
2: My Content Manager Screen Savers  
4: Applications  
1: Get New Applications  
2: My Content Manager Applications  
3: My-Cast Weather Trial  
4: Real- rTV Trial  
Contacts  
1: Find  
2: Add New Entry  
3: My Phone #  
4: Speed Dial #s  
5: Group  
107  
1: Unassigned  
2: Family  
3: Friends  
4: Colleague  
5: VIPs  
6: Empty  
7: Empty  
6: Services  
1: Account Info  
2: Customer Service  
3: Dir Assist  
108  
InUse Menu  
Press the right  
to display the following options:  
1: Speaker On  
2: Key Mute/Unmute  
3: Contacts  
4: Messaging  
5: 3-Way Call  
6: Call History  
7: Voice Memo  
8: Tools  
9: Phone Info  
109  
Section 2F  
Managing Call History  
In This Section  
The Call History keeps track of incoming calls, calls made from  
your Sprint PCS Phone, and missed calls. This section guides  
you through accessing and making the most of your Call  
History.  
111  
     
Viewing History  
You’ll find the Call History feature very helpful. It is a list of  
the last 20 phone numbers (or Contacts entries) for calls  
you placed, accepted, or missed. Call History makes  
redialing a number fast and easy. It is continually updated  
as new numbers are added to the beginning of the list and  
the oldest entries are removed from the bottom of the list.  
Each entry contains the phone number (if it is available)  
and Contacts entry name (if the phone number is in your  
Contacts). Duplicate calls (same number and type of call)  
may only appear once on the list.  
To view a Call History entry:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Call History (  
3. Select Outgoing Calls (  
), Incoming Calls (  
).  
4. Highlight the entry you wish to view and press  
),  
Missed Calls (  
), or All Recent (  
.
You can view your recent call history by pressing the talk  
key once.  
Tip:  
112  
 
Call History Options  
For additional information and options on a particular call,  
highlight a Call History entry and press  
. This feature  
displays the date and time of the call, the phone number (if  
available), and the caller’s name (if the number is already in  
your Contacts). By pressing Options (  
), you can select  
from the following options:  
Send Msg (  
) to send a text, picture, or video  
message to another recipient.  
Save ( ) to save the number if it is not already in  
Save is only displayed when the phone number is NOT  
saved in the contact list.  
Note:  
Prepend (  
) to add numbers to the beginning of the  
selected number. (See “Saving a Phone Number From  
Erase (  
) to delete the entry.  
You can also view the next Call History entry by pressing  
the navigation key right or view the previous entry by  
pressing the navigation key left.  
Tip:  
113  
 
Making a Call From Call History  
To place a call from Call History:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Call History (  
3. Select Outgoing Calls (  
), Incoming Calls (  
).  
4. Use your navigation key to select a Call History entry  
and press  
or select Call ( ).  
),  
Missed Calls (  
), or All Recent (  
You cannot make calls from Call History to entries identified  
as No Caller ID or Restricted.  
Note:  
114  
     
Saving a Phone Number From  
Call History  
Your Sprint PCS Phone can store up to 500 Contacts  
entries. Each entry’s name can contain up to twenty  
characters.  
To save a phone number from Call History:  
1. Use your navigation key to select a Call History entry  
and press Options (  
2. Select Save (  
).  
).  
3. Select New Entry to create a new internal Contacts  
entry for the number or Existing Entry to save the  
number to an existing entry. (If Existing Entry was  
selected, skip to step 7.)  
4. Select the desired label and press  
5. Use the keypad to type in the new entry name and  
press  
6. Select Done (  
.
.
).  
7. If Existing Entry was selected, use your navigation  
key to scroll through your existing contact list  
entries, highlight a name, and press  
.
8. Select the desired label and press  
.
9. Select Done (  
).  
After you have saved the number, the new Contacts entry  
115  
   
You cannot save phone numbers from calls identified as  
No Caller ID or Restricted.  
Note:  
Prepending a Phone Number From  
Call History  
If you need to make a call from Call History and you  
happen to be outside your local area code, you can add the  
appropriate prefix by prepending the number.  
To prepend a phone number from Call History:  
1. Select a Call History entry and press  
.
2. Select Options (  
).  
).  
3. Select Prepend (  
4. Enter the prefix and press Call (  
).  
116  
   
Erasing Call History  
To erase individual Call History entries, see “Call History  
To erase Call History:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Call History (  
3. Select Outgoing Calls (  
), Incoming Calls (  
),  
Missed Calls (  
), or All Recent (  
).  
4. Select Options (  
).  
5. Select Erase or Erase All.  
6. If you are certain you want to erase the call history,  
select Yes and press  
.
117  
     
Section 2G  
Using Contacts  
In This Section  
Adding a New Contact Entry  
Finding Contact Entries  
Contact Entry Options  
Adding a Phone Number to a Contact Entry  
Editing a Contact Entry’s Phone Number  
Assigning Speed Dial Numbers  
Editing a Contact Entry  
Selecting a Ringer Type for an Entry  
Secret Contact Entries  
Dialing Sprint PCS Services  
Now that you know the basics that make it easier to stay in touch  
with people and information, you’re ready to explore your phone’s  
more advanced features. This section explains how to use  
your phone’s Contacts and helps you make the most of  
your contacts and time when you are trying to connect  
with the important people in your life.  
119  
         
Adding a New Contacts Entry  
Your Sprint PCS Phone can store up to 500 Contact entries.  
Each entry’s name can contain up to twenty characters.  
To add a new entry:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Contacts (  
3. Select Add New Entry (  
).  
4. Enter a name for the new entry, press  
, then press  
the navigation key down to highlight the desired  
5. Enter the phone number for the entry and press  
.
6. To assign a speed dial number, highlight the label that  
contains the phone number and select Options ( ).  
Select Speed Dial ( ). (See “Assigning Speed Dial  
Numbers” on page 126.) Press the navigation key up  
or down to highlight an unassigned number and press  
to select.  
7. Press Done (  
) to save.  
After you have saved the number, the new Contact entry is  
120  
   
Assigning a Group Entry  
Once you save a contact entry, you can select between five  
different group listings for the entry. By assigning a contact  
to a group, you can also search easily by using just a group  
search instead.  
Assigning a Contact to a Group  
1. Press Contacts (  
2. Highlight the desired contact and press  
3. Select Edit ( ).  
4. Press the navigation key down to highlight Group and  
press  
5. Select one of the following:  
) to access the Contacts list.  
.
.
Unassigned  
Family  
Friends  
Colleague  
VIPs  
6. Press  
.
7. Select Done (  
).  
121  
 
Finding Contact Entries  
There are several ways to display your Contact entries: by  
name, by speed dial number, by group, and by voice dial  
tags. Follow the steps outlined in the sections below to  
display entries from the Contacts menu.  
Finding Names  
To find Contact entries by name:  
1. Press Menu (  
2. Select Contacts (  
3. Select Find (  
) to access the main menu.  
).  
).  
4. Scroll through all the entries using your navigation  
key.  
– or –  
Enter the first few letters of an entry name in the Find  
field. (The more letters you enter, the more your  
search narrows.)  
5. To display an entry, highlight it and press  
.
6. To dial the entry’s default phone number, press  
.
From standby mode, press Contacts (right softkey)  
to display the Search feature.  
Shortcut:  
122  
   
Finding Speed Dial Numbers  
To find phone numbers you have stored in speed dial  
locations:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Contacts (  
3. Select Speed Dial #s (  
).  
4. Scroll through speed dial entries using your  
navigation key. Speed dial numbers are displayed in  
numeric order.  
– or –  
Enter the number of a speed dial location using your  
keypad.  
5. To display an entry, highlight it and press  
.
6. To dial the entry’s default phone number, press  
.
Finding Group Entries  
To find entries designated as part of a group:  
1. Press Menu (  
2. Select Contacts (  
3. Select Group (  
) to access the main menu.  
).  
).  
4. Scroll through the group titles using your navigation  
key. To display entries belonging to a group, highlight  
the group and press  
.
5. To dial the entry’s default phone number, press  
.
123  
Contact Entry Options  
To edit a Contact entry’s information, display the entry and  
press Edit (  
press  
). To select a field, highlight it and  
.
[Add number] to add a phone number to the entry. (See  
[E-mail] to add an e-mail address to the entry.  
[URL] to add a web site’s URL to the entry.  
[Nickname] to add a nickname to the entry.  
[Memo] to add a note, street address, or other  
information to the entry.  
[Group] to assign the entry to a group.  
[Ring] to assign a preprogrammed or downloaded  
ringer.  
You can view the next entry by pressing the navigation key  
right or view the previous entry by pressing the navigation  
key left.  
Tip:  
124  
     
Adding a Phone Number to a Contact  
Entry  
To add a phone number to an entry:  
1. Display a Contact entry (See “Finding Contact  
2. Press Edit (  
).  
3. Press the navigation key down until the desired label  
is highlighted.  
4. Enter the new phone number and press  
5. Press Done ( ) to save the new number.  
.
Editing a Contact Entry’s Phone Number  
To edit an entry’s phone number:  
1. Display a Contact entry (see page 122).  
2. Press Edit (  
).  
3. Highlight the number you wish to edit and press  
.
4. Press  
to clear one digit at a time, or press and  
hold  
.
5. Re-enter or edit the number and press  
6. Press Done ( ) to save the number.  
.
125  
       
Assigning Speed Dial Numbers  
Your phone can store up to 99 phone numbers in speed  
dial locations. For details on how to make calls using speed  
Speed dial numbers can be assigned when you add a new  
Contact entry, when you add a new phone number to an  
existing entry, or when you edit an existing number.  
To assign a Speed Dial number to a new phone number:  
1. Add a phone number to a new or to an existing  
2. Highlight the entry and select Options (  
3. Select Speed Dial ( ).  
4. Press the navigation key up or down to highlight an  
available speed dial location and press  
).  
.
5. Press Done (  
) to return to the Contacts menu.  
126  
   
To assign a Speed Dial number to an existing phone number:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Contacts (  
3. Select Speed Dial #s (  
4. Highlight the desired entry and press  
5. Highlight the contact you wish to assign a speed dial  
number, and press  
).  
.
.
Editing a Contact Entry  
To make changes to an entry:  
1. Display an internal Contact entry.  
2. Press Edit (  
3. Highlight the part of the entry you wish to edit  
(Name, Group, Ring, etc.) and press  
4. Add and/or edit the desired information and  
press  
5. Press Done (  
).  
.
.
) to save your changes.  
127  
   
Selecting a Ringer Type for an Entry  
You can assign a ringer type to a Contact entry so you can  
identify the caller by the ringer type. (See “Ringer Types”  
To select a ringer type for an entry:  
1. Display a Contact entry.  
2. Press Edit (  
3. Select Ring ( ) and press  
4. Select Default Tones, Single Tones, Ring Tones, Melodies,  
Downloaded, or My Videos and press  
).  
.
.
5. Press the navigation key up or down to scroll through  
available ringers. (When you highlight a ringer type, a  
sample ringer will sound.)  
6. Select your desired ringer and press  
.
7. Press Done ( ) to save the new ringer type.  
128  
   
Dialing Sprint PCS Services  
Your Contacts are preprogrammed with phone numbers  
for various Sprint PCS Services.  
To dial a service from your Contacts:  
1. Press Menu (  
) to access the main menu.  
2. Select Contacts (  
3. Select Services (  
).  
).  
4. Select Account Info (  
Dir Assist (  
).  
), Customer Service (  
), or  
To dial a service from standby mode using your keypad:  
1. Dial the appropriate service number:  
Customer Service –  
.
Directory Assistance –  
.
Account Info –  
.
Sprint PCS Operator –  
.
Sprint PCS Voice Command –  
to place the call.  
.
2. Press  
129  
     
Section 2H  
Using the Phone’s Scheduler and  
Tools  
In This Section  
Your Sprint PCS Phone is equipped with several personal  
information management features that help you manage your  
busy lifestyle. This section shows you how to use these  
features to turn your phone into a time management planner  
that helps you keep up with your contacts, schedules, and  
commitments. It takes productivity to a whole new level.  
131  
     
Using Your Phone’s Scheduler  
Adding an Event to the Scheduler  
Your Calendar helps organize your time and reminds you  
of important events.  
To add an event:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Planner (  
4. Select Scheduler (  
).  
).  
5. Using your navigation key, highlight the day to which  
you would like to add an event.  
6. Select Options (  
).  
).  
7. Select Add New (  
Press the navigation key up or down to scroll by week  
through the Calendar or left or right to scroll by day. Press  
Options to jump to a specific date.  
Tip:  
8. Enter a description for the event using the keypad  
and select Next (  
9. Press the navigation key down to highlight the Alert  
field. Press the navigation key left or right to select  
one of the following alert notifications:  
No Alarm, On Time, 10min before, 30min before, or  
1Hr before  
132  
     
10. Press the navigation key down to highlight the Ringer  
Type field. Select a ringer type for the alarm by  
highlighting the ringer field and pressing  
.
11. Select Single Tones, Ring Tones, Melodies, or  
Downloaded and press  
.
12. Press the navigation key up or down to scroll through  
available ringers. (When you highlight a ringer type, a  
sample ringer will sound.)  
13. Select your desired ringer and press  
.
14. Press the navigation key down to highlight Start time.  
Enter the start time and then press the navigation key  
down and enter the date of your event using the  
keypad. Press  
to toggle AM or PM.  
15. Press the navigation key down to highlight End time.  
Enter the end time and then press the navigation key  
down and enter the date of your event.  
16. Press Done (  
) to save the event.  
133  
Event Alerts  
There are several ways your Sprint PCS Phone alerts you of  
scheduled events:  
By playing the assigned ringer type.  
By illuminating the backlight.  
By flashing the LED.  
Event Alert Menu  
When your phone is turned on and you have an event  
alarm scheduled, your phone alerts you and displays the  
event summary. To silence the alarm and reset the  
schedule, press  
.
Viewing Events  
To view your scheduled events:  
1. Press Menu (  
2. Select Tools (  
3. Select Planner (  
) to access the main menu.  
).  
).  
4. Select Scheduler (  
).  
5. Using your navigation key, highlight the day for  
which you would like to view events and select  
View (  
). (If you have events scheduled for the  
selected day, they will be listed in chronological  
order).  
In the calendar view, days with events scheduled are  
highlighted.  
Tip:  
134  
     
6. To display the details of an event listed in the  
schedule, highlight it and press  
.
Going to Today’s Calendar Menu  
The Today menu allows you to view the events for the day.  
To access the today menu:  
1. Press Menu (  
2. Select Tools (  
3. Select Planner (  
4. Select Today (  
) to access the main menu.  
).  
).  
).  
135  
 
Adding a New Task  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Planner (  
4. Select Task List (  
).  
).  
If there are no existing tasks, the New Task screen is  
automatically displayed.  
Note:  
5. Select Options (  
6. Enter the Task Description and select Next (  
7. Select the Priority (low or high), Due Time, and Due Date  
and select Done ( ).  
Adding a New Countdown  
) and press  
for Add New.  
).  
1. Press Menu (  
2. Select Tools (  
3. Select Planner (  
) to access the main menu.  
).  
).  
4. Select Countdown (  
).  
If there are no existing tasks, the New Task screen is  
automatically displayed.  
Note:  
5. Select Add New (  
6. Enter the Countdown Description and select  
Next ( ).  
).  
136  
7. Enter the Time and Date and select Done (  
).  
Erasing a Day’s Events  
To erase a day’s scheduled events:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Planner (  
).  
4. Select Scheduler (  
).  
5. Using your navigation key, highlight the day for  
which you would like to erase events and select  
Options (  
).  
In the calendar view, days with events scheduled are  
highlighted.  
Tip:  
6. Select Erase All (  
). (An confirmation will appear  
asking you to confirm the deletion)  
7. Select Yes or No and press  
.
If the day for which you are erasing events contains a  
repeating event, you will receive the following prompt:  
“This is a recurring event <event name>.” Select Erase this  
to erase a single occurrence, Erase all to erase all  
occurrences of the event, or Cancel to cancel the deletion  
of the repeating event.  
Note:  
137  
   
Using Your Phone’s Alarm Clock  
Your phone comes with a built-in alarm clock with  
multiple alarm capabilities.  
To use the alarm clock:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Alarm Clock (  
).  
4. Select Alarm #1 (  
), Alarm #2 (  
), or  
Alarm #3 (  
).  
5. Press the navigation key left or right to select On.  
6. Press the navigation key down to highlight the Time  
field. Enter a time for the alarm using the keypad.  
(Press  
7. Press the navigation key down to highlight the Ring  
field and press  
8. Select Single Tones, Ring Tones, Melodies, or  
Downloaded and press  
to toggle between AM and PM.)  
.
.
9. Press the navigation key up or down to scroll through  
available ringers. (When you highlight a ringer type, a  
sample ringer will sound.)  
10. Select your desired ringer and press  
.
11. Press the navigation key down to highlight the Repeat  
field. Press the navigation key left or right to select  
one of the following:  
Daily, Once, Mon to Fri, or Sat & Sun  
12. Select Done ( ) to save.  
138  
   
Using Your Phone’s Memo Pad  
Your Sprint PCS Phone comes with a memo pad you can  
use to compose and store reminders and notes to help  
keep you organized.  
To compose a memo:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
).  
3. Select Memo Pad (  
If there are no existing memos already saved, the new  
memo screen will automatically be displayed.  
Note:  
4. Select Add New (  
5. Type your note using the keypad and select OK  
).  
(
To read a saved memo:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
).  
3. Select Memo Pad (  
4. Highlight a memo and press  
.
139  
   
To delete saved memos:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Memo Pad (  
).  
4. Highlight a memo and select Options (  
).  
5. Select Erase (  
) to erase the highlighted memo or  
) to erase all saved memos.  
Erase All (  
6. Select Yes to confirm and press  
.
140  
Using Your Phone’s Tools  
In addition to helping you be more efficient and organized,  
your Sprint PCS Phone offers useful and entertaining tools.  
Managing Voice Memos  
You can use your phone’s Voice Services to record brief  
memos to remind you of important events, phone  
numbers, or grocery list items.  
Recording Voice Memos  
To record a voice memo:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Voice Memo (  
).  
4. Select Record (  
). (The phone prompts you to start  
recording after the beep.)  
5. Wait for the beep and then start speaking. (As it is  
recording, the phone displays a countdown timer  
that shows how many seconds are left for recording.)  
6. To pause the memo, select Pause (  
). To resume  
the recording, select Resume (  
).  
7. To finish recording, select Finish (  
).  
141  
       
To record a conversation during a phone call:  
1. During a call, select Options ( ).  
2. Select Voice Memo ( ) (A 30-second counter is  
displayed on the screen to indicating the amount of  
time a single voice memo can be recorded.)  
Only incoming audio is recorded when selecting voice  
memo during a call.  
Tip:  
3. To pause the memo, select Pause (  
). To resume  
the recording, select Resume (  
).  
4. To finish recording, select Done (  
).  
A total of six 30-second memos can be recorded and saved.  
Tip:  
Reviewing and Erasing Memos  
To play the voice memos you have recorded:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Voice Memo (  
).  
4. Select Review (  
). (The phone displays a list of  
saved memos, with the first one selected.)  
5. Highlight the desired memo and press  
.
or —  
Press the number corresponding to the memo you  
want to review.  
142  
To erase an individual memo:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Voice Memo (  
4. Select Review ( ).  
5. Highlight the desired memo to erase and select  
).  
Options (  
).  
6. Select Erase (  
).  
7. Select Yes and press  
.
To erase all voice memos:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Voice Memo (  
4. Select Erase All (  
).  
).  
5. Select Yes and press  
.
143  
Using the Task List  
Your phone comes with a built-in task list to allow you to  
keep track of important items.  
To use the task list:  
1. Press Menu (  
2. Select Tools (  
3. Select Planner (  
4. Select Task List (  
) to access the main menu.  
).  
).  
).  
If there are no existing task lists already saved, the new  
task screen will automatically be displayed.  
Note:  
5. Select Options (  
6. Enter the task description using the keypad and  
select Next ( ).  
) and press  
for Add New.  
7. Press the navigation key left or right to select the  
desired priority level (Low or High).  
8. Press the navigation key down to highlight the Due  
Time field. Enter the Due Time (press  
to toggle  
between AM or PM) of the task.  
9. Press the navigation key down to highlight the Due  
Date field. Enter the Due Date of the task.  
10. Select Done (  
) to save.  
144  
   
Viewing a Saved Task  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Planner (  
4. Select Task List (  
).  
).  
5. Highlight a task and press  
.
Deleting a Task  
1. Press Menu (  
2. Select Tools (  
3. Select Planner (  
4. Select Task List (  
) to access the main menu.  
).  
).  
).  
5. Highlight a task and select Options (  
).  
6. Select Erase (  
) to erase the highlighted task or  
) to erase all saved tasks.  
Erase All (  
7. Select Yes to confirm and press  
.
World Time  
To view the time in over twenty different locations:  
1. Press Menu (  
) to access the main menu.  
2. Select Tools (  
).  
3. Select World Time (  
).  
4. Press the navigation key left or right to scroll through  
different time zones.  
145  
   
You can turn on or off Daylight Savings Time by pressing  
the right softkey to select Set DST.  
Note:  
Using the Calculator  
Your phone comes with a built-in calculator.  
To use the calculator:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Tools (  
3. Select Calculator (  
).  
4. Enter the first number using your keypad and  
perform one of the following functions:  
Press the navigation key up for Multiplication (x).  
Press the navigation key down for Division (÷).  
Press the navigation key left for Subtraction (-).  
Press the navigation key right for Addition (+).  
Press  
Press  
Press  
or  
for a decimal point.  
for a negative number.  
to clear all numbers.  
5. Enter the second number and press  
for  
Equals (=).  
146  
   
Countdown  
Countdown allows you to enter a future date and time into  
the phone and then see the amount of days, hours, and  
minutes until that time is reached.  
To set up a new countdown:  
1. Press Menu (  
2. Select Tools (  
3. Select Planner (  
) to access the main menu.  
).  
).  
4. Select Countdown (  
).  
If there are no existing countdowns, the New Countdown  
screen is automatically displayed.  
Note:  
5. Select Add New (  
).  
6. Enter a name using the keypad and select Next (  
).  
)
7. Enter the Time and Date values and select Done (  
to save. (Press  
to toggle between AM or PM.)  
To view a countdown:  
1. Press Menu (  
) to access the main menu.  
2. Select Tools (  
).  
3. Select Planner (  
4. Select Countdown (  
).  
).  
5. Highlight the desired countdown and press  
.
When viewing an existing countdown, press the navigation  
key left or right to cycle between countdown entries.  
Note:  
147  
   
Section 2I  
Using Your Phone’s Voice Services  
In This Section  
Your Sprint PCS Phone’s Voice Services let you place calls using  
your voice. This section includes easy-to-follow instructions  
on using voice-activated dialing.  
149  
     
New Features  
Your MM-A880’s voice recognition feature lets you perform  
many of your phone's functions using just your voice. If  
you have used VoiceSignal voice recognition on previous  
Sprint PCS Phones, please review the following list of  
enhancements.  
Natural one-step commands - Instead of a series of  
commands, you can now issue single voice commands  
to accomplish a variety of complex tasks.  
For example:  
“Call John Mobile”: Dials the mobile number  
stored for the contact entry “John.”  
“Call Maria Work”: Dials the work number stored  
for the contact entry Maria.  
“Call 555-555-5555”: Dials the specified number.  
One-step voice access to text messaging - The “Send  
Text” command lets you use a single voice command to  
launch the phone's text messaging client and specify a  
recipient.  
For example:  
“Send Text to John”: Opens the text message  
client and addresses the message to the mobile  
number of the contact entry “John”.  
One-step access to applications and menus - You can  
access applications and common menus by saying “Go  
To” followed by the application or menu name.  
For example:  
150  
 
“Go To Calendar”: Launches the “Calendar”  
application.  
“Go To Downloads”: Displays the “Downloads”  
menu.  
Voice commands for checking phone status - With a  
single command, you can have the phone play back  
and display its phone number, the current signal  
strength, network coverage, battery level, or all of the  
above.  
For example:  
“Check Battery”: Instructs the phone to report its  
current battery strength.  
“Check Status”: Instructs the phone to report all  
status information.  
151  
Using Voice-Activated Dialing  
Voice recognition allows you to say commands to perform  
common functions supported by your phone. There is no  
voice training required to use the voice recognition  
feature. You simply say the pre-designated command  
displayed on your screen in a normal tone of voice to  
perform the desired function.  
To activate voice recognition:  
1. Press and hold  
. (The phone prompts you to say a  
voice command.)  
Voice Activated dialing can also be configured to prompt  
you when the flip is opened. For more information, See  
Tip:  
2. Wait for the beep and then say one of the following  
commands:  
Call <Name or #>  
Send Text <Name>  
Lookup <Name>  
Go To <App>  
Check <Item>  
When it recognizes one of these commands, the phone  
launches the associated application. If the phone does not  
hear a command within approximately eight seconds, it  
de-activates voice recognition without taking any action.  
152  
     
Voice Launch  
Voice Launch allows you to configure how to launch  
Voice-Activated dialing.  
To access voice launch:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Voice Service (  
).  
).  
4. Select Voice Launch (  
5. Select Talk Key or Talk Key and Flip Open and press  
.
153  
 
Using Call <Name or #>  
You can voice dial from your phone with a single  
command by saying “Call” followed by a name or  
nickname (see documentation for details) and (optionally)  
a label stored in your contact list, or “Call” followed by a  
valid phone number. You can also say “Call” by itself and  
be prompted for the name or number.  
Calling Contacts Entries  
To place a call using Call <Name or #>:  
1. Press and hold  
.
2. Say “Call” followed by the name and the label for that  
number. For example, say “Call John Mobile.The  
phone dials the number stored for the contact “John”  
with the label “Mobile.”  
If the location recognized for the name does not have a  
number stored in contacts, VoiceSignal will play the  
message “No number available, John Smith, Mobile,” and  
then launch the Contacts application for that name.  
If a name has only a single number, or if you know the  
name but are not sure which number to call, say “Call”  
followed by the name only. For example, say “Call John.” If  
the name is recognized and there is only one number for  
the name, VoiceSignal immediately places the call. If there  
are multiple numbers stored for the contact, the phone  
prompts you with “Which Number?” and displays a list of  
options. You can select an option by saying it or by using  
your keypad.  
154  
   
Calling Nicknames  
Your Contact List incorporates a field called “Nickname.”  
When you add a nickname to a contact, you can say the  
contact's name or nickname when using the voice features.  
For example, if you have a contact, “John Smith” stored in  
your contact list, and you add, “Dad” to the nickname field,  
you can call that contact by saying, “Call John Smith” or by  
saying “Call Dad.”  
If your contact list contains a name that you have difficulty  
using with the voice features (such as some unusual or  
foreign names), you can add a nickname for that contact  
that spells out the proper pronunciation of that name.  
Tip:  
Calling Phone Numbers (Digit Dialing)  
To voice dial a number that is not stored in your contact list:  
Say “Call” followed immediately by a valid string of  
digits to be dialed, for example, say  
“Call 555 555 5555."  
Speak naturally and clearly and remember to speak one  
digit at a time- 1-800 should be pronounced “One Eight  
Zero Zero.”  
Adapting Digit Dial  
Digit Dialing is speaker independent, which means that no  
training or adaptation is required. Some users with heavy  
accents or unusual voice characteristics may find difficulty  
in achieving high accuracy with speaker independent Digit  
Dialing, so the Adapt Digits feature allows users to  
dramatically improve the digit accuracy through  
adaptation. Users who get acceptable digit recognition  
155  
   
accuracy will find no additional benefit to performing the  
Adapt Digit adaptation.  
After you adapt Digit Dial, your phone will be customized  
to your voice. Other people will not be able to use Digit  
Dial on your phone unless they reset the phone to factory  
defaults.  
ONLY adapt Digit Dial if the system is frequently mis-  
recognizing your speech. You can always restore the  
system to its original factory setting.  
Note:  
Adaptation involves recording several digit sequences to  
teach the system your voice. The adaptation process takes  
about 3 minutes.  
Tips for adapting Digit Dial:  
Adapt digits in a quiet place.  
Make sure you wait for the beep before starting to  
speak.  
Speak clearly, but say each digit sequence naturally.  
If you make a mistake while recording a sequence of  
digits, or if there is an unexpected noise that spoils the  
recording, you can say or select No when the prompt  
asks, “Did the recording sound OK?” You will then be  
prompted to re-record the sequence.  
To adapt Digit Dial to your voice:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Voice Service (  
).  
).  
4. Select Digit Dialing (  
156  
5. Select Adapt Digits (  
) and press  
to begin. (The  
phone displays the first digit sequence.)  
6. Wait for the beep, and then repeat the digits using a  
normal tone of voice. (The phone plays back your  
recording and asks you if the recording sounds “OK.)  
7. If the recording sounds OK (no mistakes and no  
background noises), say Yes.  
8. If you need to re-record the digits to fix any problems,  
say No. (The phone then prompts you to say the digits  
again.)  
9. Wait for the beep, and then record the digits again.  
(Repeat this step until you are satisfied with the  
recording.)  
10. After confirming that the recording sounds OK,  
repeat the recording process with the next set of  
digits. (After six sets of digits, the phone will ask you  
whether you want to do more adaptation. Answer  
Yes.)  
11. Repeat steps 6-9 for another six sets of digits. (After  
the sixth set of digits, you will be half-way through  
the session and the phone will ask “More  
Adaptation?”)  
12. Select OK to continue for six more sets of digits, or  
press  
for partial adaptation. When you are  
finished with a full session, you will reach a screen  
that reads, “Adaptation Complete.”  
157  
It is recommended that you perform the complete  
adaptation of Digit Dial at least once to achieve the  
maximum benefit of this feature. If a partial adaptation is  
performed, you can always return later and resume the  
process from the half-way point.  
Note:  
Resetting Digit Dial Adaptation  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Voice Service (  
4. Select Digit Dialing (  
5. Select Reset Digits (  
).  
).  
).  
6. Press the navigation key up or down to select Yes and  
press  
.
Using Choice Lists  
If VoiceSignal is not confident it has recognized a name or  
number correctly, it might display a choice list and prompt  
you with “Call?” followed by the first choice on the list. To  
confirm the choice, say “Yes” or to hear the next choice,  
say “No.You can also select the correct choice using your  
keypad. To cancel the command, say “Cancel,” or to say the  
name or number again, say “Repeat.”  
158  
 
Enabling/Disabling Choice Lists  
You can customize whether the Voice Recognition feature  
displays a list of top voice recognition choices or  
automatically dials the first number, without displaying a  
choice list.  
To enable or disable choice lists for Digit Dial:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Voice Service (  
).  
).  
4. Select Choice Lists (  
5. Select Automatic, Always On or Always Off and  
press  
.
159  
   
Using Send Text <Name>  
With a single voice command you can launch the text  
message client on the phone and specify a recipient for the  
message.  
To launch a text message:  
1. Press and hold  
.
2. Say “Send Text” followed immediately by the name of  
a person in your contact list and, optionally, the type  
of the number you want to send it to. For example,  
say “Send Text John Smith.”  
If you do not specify the number type and there are  
multiple numbers for the name, VoiceSignal chooses the  
mobile number by default.  
If you say the “Send” command without specifying a  
recipient, VoiceSignal prompts you with “Say the name.”  
Say the name of a person in your contact list and,  
optionally the type of number.  
160  
 
Using Lookup <Name>  
You can look up and display contact information for any  
person stored in your contact list by saying “Lookup,”  
followed by the name.  
To use Lookup <Name>:  
1. Press and hold  
.
2. Say “Lookup John Smith.” The MM-A880 Contacts  
application for the specified contact is displayed.  
If you say only “Lookup,” VoiceSignal prompts you with  
“Say the name.”  
Using Go To <App>  
You can open an application or access a menu by saying  
“Go To” followed immediately by the “destination,” either  
an application or menu.  
To see a list of possible destinations:  
1. Press and hold  
.
2. Say “Go To” by itself. A list of valid destinations is  
displayed and prompts you with “Please Choose.” If  
the list is too long to fit on one screen, the screen  
displays “Next Menu.You can say the name of a  
destination, or say “Next Menu” to view the next  
screen.  
161  
   
Using Check <Item>  
You can have the phone play back and display information  
about its current state, including its phone number,  
current signal strength, network coverage, and battery  
level.  
To see and hear status information:  
1. Press and hold  
.
2. Say “Check” followed immediately by one of the  
following items:  
Status: plays back and displays ALL status  
information.  
Signal: plays back and displays current signal  
strength.  
Network: plays back and displays current network  
coverage.  
Battery: plays back and displays the current level  
of battery charge.  
My phone #: plays back and displays your phone  
number.  
162  
 
For example, say “Check Status.” The phone responds by  
playing back and displaying the message “Battery…Low.”  
You can also say “Check” by itself. The phone prompts you  
to say one of the valid status items.  
No Coverage - When handset is scanning.  
Sprint Coverage - Handset in on a non-roam system.  
Digital Roam - Handset is on a digital roam system.  
Coverage  
High - Number of bars displayed is 4 or more.  
Signal Strength  
Good - Number of bars displayed is 2/3.  
Low - Number of bars displayed is 0/1.  
No Signal - Handset is scanning for system.  
High - Number of bars displayed in the battery icon is 3.  
Battery  
Medium - Number of bars displayed in the battery icon is 2.  
Low - Number of bars displayed in the battery icon is 1.  
Empty - Low battery alert.  
163  
 
Section 2J  
Using the Built-in Camera and  
Camcorder  
In This Section  
Sending Sprint PCS Picture MailSM  
The built-in camera on your MM-A880 by Samsung gives  
you the ability to take full-color digital pictures and videos,  
view them using the phone’s display, and instantly share  
them with your family and friends. It’s fun and as easy to  
use as a traditional point-and-click camera: just take a  
picture or video, view it on your phone’s display, and send  
it from your phone to up to ten people. This section  
explains the features and options of your Sprint PCS  
Phone’s built-in camera and camcorder.  
165  
       
Taking Pictures  
Taking pictures with your phone’s built-in camera is as  
simple as choosing a subject, pointing the lens, and  
pressing a button. You can activate the phone’s camera  
mode whether the phone is open or closed.  
To take a picture with the phone open:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
) to access the Pictures and  
Video menu.  
3. Select Camera (  
) to activate camera mode.  
(Additional camera options are available through the  
camera mode Options menu. see “Camera Mode  
Options” on page 169 for more information.)  
4. Using the phone’s LCD as a viewfinder, aim the  
camera lens at your subject.  
5. Press Capture (  
),  
, or the side camera button  
until the shutter sounds. (The picture will  
automatically be saved in the In Camera folder.)  
To return to camera mode to take another picture,  
press  
.
6. Press Next (  
) for more options:  
Send Msg to send the picture to up to 10 contacts  
at one time. (See page 192 for details.)  
Camera Mode to return to camera mode to take  
another picture.  
Upload to upload the picture you just took to the  
Sprint PCS Picture Mail Web site (www.sprint.com/  
166  
   
picturemail). Depending on your settings, you may  
be prompted to accept a Sprint PCS Vision  
connection.  
Assign to assign the picture as a Picture ID, Screen  
Saver, or Incoming Call.  
Erase to delete the picture you just took.  
Review Pictures to go to the In Camera folder to  
review your saved pictures.  
To take a picture with the phone closed:  
1. Press and hold the side camera button to activate  
camera mode.  
2. Point the camera lens at your subject. (You can check  
the picture framing through the display screen.  
When you are using the display as a view finder, the image  
preview will automatically change aspect when the phone  
is rotated vertically or horizontally.  
Note:  
3. Press the side camera button to take the picture. (The  
picture will automatically be saved in the  
In Camera folder.)  
167  
 
Creating Your Sprint PCS Picture Mail Password  
The first time you use any of the picture management  
options involving the Sprint PCS Picture Mail Web site, you  
will need to establish a Sprint PCS Picture Mail password  
through your Sprint PCS Vision Picture Phone. This  
password will also allow you to sign in to the Sprint PCS  
Picture Mail Web site at www.sprint.com/picturemail to access  
and manage your uploaded pictures and albums.  
To create your Sprint PCS Picture Mail password:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
) to access the Pictures and  
Video menu.  
3. Select Online Albums (  
).  
4. Select View Albums and press  
. (You will be  
prompted to create a Sprint PCS Picture Mail  
password.)  
If your Sprint PCS Service Plan does not include Sprint PCS  
Picture Mail, you will first be prompted to subscribe to the  
service for an additional monthly charge.  
Note:  
5. Enter a four- to eight-digit password and press  
.
(You will be prompted to confirm your password.)  
6. Please wait while the system creates your account.  
Write down your Sprint PCS Picture Mail password in a  
secure place.  
Tip:  
Once you have received confirmation that your account  
has been successfully registered, you may upload and share  
pictures and access the Sprint PCS Picture Mail Web site.  
168  
   
Camera Mode Options  
When the phone is in camera mode, press Options (  
)
to display the following:  
1. Flash to activate the flash. (see “Setting the Flash” on  
page 170.)  
2. Self-Timer to activate the camera’s timer. (see “Setting  
3. Fun Tools to select from the following options:  
Fun Frames to select your favorite fun picture  
frame to decorate your picture. (Fun Frames are  
only available in full mode. See “Fun Frames” on  
Color Tones to select a wide variety of color tones  
for the picture (Auto, Monochrome, Sepia, Green,  
Aqua, Antique, Cool, or Warm. See “Color Tones” on  
page 172.)  
4. Controls to select from the following options:  
Brightness Allows you to adjust the brightness  
using 10 different levels from -5 to +5.  
White Balance to adjust white balance based on  
changing conditions. Select from Auto, Sunny,  
Cloudy, Tungsten, Fluorescent, or Manual.  
5. Settings to select Resolution, Quality, Shutter Sound,  
Auto-Erase and View Mode. (See “Selecting Camera  
6. Review Pictures to go to your phone’s In Camera  
and to switch to the Camcorder video mode. (See  
7. Camcorder to automatically switch to the camcorder.  
169  
 
Setting Picture Mode  
To set the picture mode:  
1. From camera mode, press Options (  
).  
2. Select Settings (  
3. Highlight View Mode and press  
4. Press the navigation key up or down to highlight  
).  
.
Wide Screen or Full Screen and press  
.
Settingthe Flash  
To activate the flash:  
1. From camera mode, press Options (  
).  
2. Select Flash (  
).  
3. Select one of the following options and press  
.
Off to deactivate the flash.  
On This Shot to activate the flash for one shot.  
Always On to activate the flash for all pictures.  
Settingthe Self-Timer  
To activate the Self-Timer:  
1. From camera mode, press Options (  
).  
2. Select Self-Timer (  
3. Press the navigation key up or down to select the  
desired length of delay (Off, 5 Seconds, 10 Seconds) and  
press  
).  
.
4. Select Capture (  
) when you are ready to start the  
timer.  
170  
 
5. Get ready for the picture. (The phone will begin to  
beep when the timer is started.)  
To cancel the Self-Timer after it has started:  
Press  
.
While the Self-Timer is active, all keys are disabled except  
Back (stops the timer and returns to the camera mode) and  
End (cancels the timer and returns to standby mode).  
Note:  
Fun Frames  
Allows you to choose from several frame overlays for your  
image.  
Fun Frames are only available in full mode. They cannot be  
used in Wide Screen.  
Note:  
The following frames are available:  
Off (No frame overlay image)  
Night  
Funny Glasses  
Wedding  
Roses for Love  
Cat eyes  
Bakery  
Stars  
Play Room  
Blue Flowers  
Blocks  
171  
 
To access fun frames:  
1. From camera mode, press Options (  
).  
2. Select Fun Tools (  
3. Highlight Fun Frames and press  
4. Press the navigation key left or right to select the  
desired frame and press  
).  
.
.
Color Tones  
Allows you to choose a custom color tone for your images.  
The available options are:  
Auto: Automatically adjusts the picture for the  
best color quality available.  
Monochrome: Changes the picture to black and  
white.  
Sepia: Adds a sepia tint to the picture. This is the  
common orange tint that was popular back in  
early photography.  
Green: Adds a green tint to the video.  
Aqua: Adds an aqua tint to the video.  
Antique: Adds orange highlights for an antique  
look.  
Cool: Increases blue and green tints to give a cool  
color.  
Warm: Increases red and orange tints giving a  
warm color.  
172  
To access color tones:  
1. From camera mode, press Options (  
).  
2. Select Fun Tools (  
3. Highlight Color Tones and press  
4. Press the navigation key left or right to select the  
desired color tone and press  
).  
.
.
Using the Zoom  
This feature allows you to zoom in on an object when you  
take a picture. Depending on your resolution settings, you  
can adjust the zoom to five different levels.  
The Zoom feature is unavailable in the highest resolution  
setting (Best: 1152x864).  
Note:  
To use the zoom:  
1. From camera mode, press the navigation left or right  
to adjust the zoom.  
2. Press Capture (  
) or the side camera button to take  
the picture. (The picture will automatically be saved  
in the In Camera folder based on your storage  
setting.)  
173  
Selecting Camera Settings  
To select your camera settings:  
1. From camera mode, press Options (  
).  
2. Select Settings (  
3. Press the navigation key down to highlight one of the  
following options and press  
).  
.
Resolution to select a picture’s file size (Best:  
1152x864, HI: 640x480, Med: 320x240, or Low: 176x216).  
Quality to select the picture quality setting (Fine,  
Normal, or Economy).  
Shutter Sound to select a shutter sound (Off, Shutter  
1-3, and Say Cheese).  
Auto-Erase If the auto-erase function is on, the  
pictures stored in your phone’s memory are  
automatically deleted after they are uploaded to  
an online album.  
View Mode allows you to choose between Wide  
Screen and Full Mode.  
174  
 
Storing Pictures  
Your phone’s picture storage area is called My Pictures.  
There are two types of folders in My Pictures that can be  
used separately according to your needs:  
In Camera (see below)  
Saved to Phone (see page 177)  
In Camera Folder  
Once a picture is taken, it is automatically saved to the  
In Camera folder. From the In Camera folder, you can view all  
of the pictures you have taken, store selected images in your  
phone, send pictures to the Sprint PCS Picture Mail Web site  
(www.sprint.com/picturemail), delete images, and access  
additional picture options.  
To review your stored pictures in the In Camera folder:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
).  
3. Select My Pictures (  
).  
4. Select In Camera and press  
.
5. Use your navigation key to view and scroll through  
the pictures.  
175  
     
In Camera Folder Options  
When you are viewing the images in the In Camera folder  
press Options (  
) to display the following options:  
Upload to upload pictures from the In Camera folder to  
the Sprint PCS Picture Mail Web site (www.sprint.com/  
picturemail). Depending on your settings, you may be  
prompted to accept a Sprint PCS Vision connection.  
Choose from the following options:  
Upload Selection to upload the currently  
highlighted picture.  
Upload All to upload all pictures in the In Camera  
folder.  
If this is the first time you have accessed the Sprint PCS  
Picture Mail account, you will be prompted to create your  
Sprint PCS Picture Mail Password. see “Creating Your  
Note:  
Assign to display the currently highlighted picture for  
picture ID, incoming call, or screen saver.  
Save to Phone allows you to save images from the In  
Camera folder into the phone memory for use as  
assigning images to contacts, screen savers, etc.  
Edit... allows you to rename the image file, edit or record  
the 10 second voice caption, or turn the lock on or off.  
(The edit option is only available in the “In Camera”  
menu.)  
Erase to delete pictures in the In Camera or Saved to  
Phone folder. Select Erase Selection or Erase All.  
Deleting pictures will free up memory space in your phone  
to enable you to take more pictures.  
Note:  
176  
 
Picture Info displays the selected picture’s information  
containing picture name, time and date, picture size,  
uploaded status, resolution, and quality.  
Camera Mode allows you to switch to camera mode to  
take additional pictures.  
Thumbnail/Expand to switch the display from expanded  
view to thumbnail view (up to four pictures per  
screen).  
Saved to Phone Folder  
When you assign or download a picture, it will  
automatically be saved in the Saved to Phone folder. The  
Saved to Phone folder allows you to store copies of  
pictures on your phone and to assign pictures to various  
phone tasks.  
To save a picture to the Saved to Phone folder:  
1. From the In Camera folder (See “In Camera Folder” on  
page 175), highlight a picture you wish to save to the  
Saved to Phone folder and select Options (  
). (The In  
Camera folder options will display.)  
If there is no selected picture, the currently highlighted  
picture will be selected.  
Tip:  
2. Select Save to Phone (  
). (A copy of the picture will  
be saved to the Saved to Phone folder.)  
177  
 
To view pictures stored in the Saved to Phone folder:  
1. Press Menu ( ) to access the main menu.  
2. Select Picture & Video (  
).  
3. Select My Pictures (  
).  
4. Highlight Saved to Phone and press  
.
5. Use your navigation key to view and scroll through  
the pictures.  
Saved to Phone Folder Options  
When you are viewing the Saved to Phone folder, press  
Assign (  
) to display the following options:  
Picture ID to display the currently highlighted picture  
for incoming calls from a specific Contacts entry. Select  
the desired entry and press  
.
Screen Saver to display the currently highlighted  
picture as a screen saver.  
Incoming Call to display With Caller ID or No Caller ID  
when receiving incoming calls.  
Pictures assigned as Picture ID or Screen Savers will  
automatically be copied to the Saved to Phone folder.  
Note:  
178  
 
Ordering Prints  
The Ordering Prints option allows you to send images  
saved in your phone to retail stores (like Fuji) or mail order  
photography outlets and receive printed copies of your  
images.  
To use the Order Print option, you must subscribe to the  
Sprint PCS Picture Mail service.  
Note:  
Prints at Retail  
The Prints at Retail option allows you to connect to the  
Sprint PCS Vision network and access the Print@Retail  
screen. This allows you to select an existing image or  
capture a new one to send to a Fuji Film Retailer in your  
area.  
To send an image:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Picture & Video (  
3. Select Order Prints (  
4. Select Prints at Retail (  
).  
).  
5. Press the navigation key down to highlight the image  
field and press  
6. Select In Camera or New Picture and press  
7. Select the desired image or capture a new one and  
select Send ( ).  
.
.
179  
       
Prints by Mail  
The Prints by Mail option allows you to select an existing  
image or capture a new one to send to a retail store for  
printing. The prints are then mailed back to you after  
processing is completed.  
To send an image:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Picture & Video (  
3. Select Order Prints (  
4. Select Prints by Mail (  
).  
).  
5. Press the navigation key down to highlight the image  
field and press  
6. Select In Camera or New Picture and press  
7. Select the desired image or capture a new one and  
select Send ( ).  
.
.
180  
   
Printing Pictures Using PictBridge  
PictBridge is an industry standard established by CIPA that  
enables a range of digital photo solutions including direct  
photo printing from a digital camera to a printer without  
the need for a PC.  
Printing From Your Phone  
The MM-A880 comes equipped with a built-in camera that  
allows you to print images directly to a printer using the  
PictBridge technology. A USB cable must be connected  
between the two devices before any printing can occur.  
To use PictBridge to print pictures from your phone:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
).  
).  
3. Select PictBridge Print (  
4. Read the Connect Printer message and insert the USB  
cable into the Phone.  
5. Insert the other end into the USB slot on the printer.  
(Printer must support PictBridge.).  
6. Highlight the desired image and select Next (  
).  
(To select multiple images, press  
to place a  
check mark next to each image selected.)  
7. Highlight Copies and press the navigation key left or  
right to select the desired number of copies to print.  
8. Press the navigation key down to select Type. Press  
the navigation key left or right to select one of the  
following:  
181  
       
Standard: prints the standard image.  
Index: prints the index information.  
9. Press the navigation key down to select Paper Size.  
Press the navigation key left or right to select one of  
the following sizes:  
4x6  
Default  
10. Press the navigation key down to select Border. Press  
the navigation key left or right to turn on or off.  
11. Press the navigation key down to select Date Print.  
Press the navigation key left or right to turn on or off.  
12. Select Preview (  
Print ( ) to print the image.  
13. Select Yes to confirm printing and press  
) to preview the image or select  
.
182  
Recording Videos  
In addition to taking pictures, you can also record, view,  
and send videos to your friends and family with your  
phone’s built-in video camera.  
To record a video:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
) to access the Picture &  
Video menu.  
3. Select Camcorder (  
) to activate video mode.  
(Additional video options are available through the  
video mode Options menu. see “Video Mode Options”  
on page 184 for more information.)  
4. Using the phone’s LCD as a viewfinder, aim the  
camera lens at your subject.  
5. Press Record (  
),  
, or the side camera button  
to begin recording. (Maximum video mail recording  
time is 15 seconds.)  
6. Press Done (  
automatically be saved in the In Camcorder folder.)  
7. Press Next ( ) for more options:  
) to stop recording. (The video will  
Send Msg to send the video.  
Play to play the recorded video.  
Upload to upload the video to an online album.  
Assign to assign the video as a movie ID, screen  
saver, or incoming call.  
Erase to delete the video or all videos saved in the  
phone.  
183  
   
Camcorder to switch back to camcorder mode.  
Review Videos to review all videos saved in the  
phone.  
Video Mode Options  
When the phone is open and in camcorder mode, press  
Options (  
) to display additional camera options:  
Movie Light to activate the movie light.  
Self-Timer to activate the camera’s timer. (see “Setting  
Color Tones to select a wide variety of color tones for the  
picture (Auto, Monochrome, Sepia, Green, Aqua, Antique,  
Cool, or Warm). (The default setting is Auto.)  
Controls... to select from the following options:  
Brightness Allows you to adjust the brightness  
using 10 different levels from -5 to +5.  
White Balance to adjust white balance based on  
changing conditions. Select from Auto, Sunny,  
Cloudy, Tungsten, Fluorescent, or Manual.  
Settings... to select Quality or Auto-Erase. (see “Selecting  
Review Videos to view your saved videos folder and to  
switch to the Camera mode.  
Camera Mode switches automatically to the camera.  
184  
 
Setting the Movie Light  
To set the movie light:  
1. From camcorder mode, press Options (  
).  
2. Select Movie Light (  
).  
3. Select Off, On This Movie, or Always On and press  
.
Settingthe Self-Timer  
To activate the Self-Timer:  
1. From camcorder mode, press Options (  
2. Select Self-Timer ( ).  
3. Highlight the length of delay you want the timer to  
use (Off, 5 Seconds or 10 Seconds) and press  
).  
.
4. Select Start (  
) when you are ready to start the  
timer.  
5. Get ready for the video. (A timer will display in the  
upper right corner and the phone will begin to beep  
when the timer is started.)  
To cancel the Self-Timer after it has started:  
Press  
.
185  
Color Tones  
Allow you to choose a custom color tone for your video  
clips.  
The available options are:  
Auto: Automatically adjusts the video for the best  
color quality available.  
Monochrome: Changes the video to black and  
white.  
Sepia: Adds a sepia tint to the video. This is the  
common orange tint that was popular back in  
early photography.  
Green: Adds a green tint to the video.  
Aqua: Adds an aqua tint to the video.  
Antique: Adds orange highlights for an antique  
look.  
Cool: Increases blue and green tints to give a cool  
color.  
Warm: Increases red and orange tints giving a  
warm color.  
To access color tones:  
1. From camcorder mode, press Options (  
).  
2. Select Color Tones (  
3. Press the navigation key left or right to select the  
desired color tone and select Done ( ).  
).  
186  
Controls  
The controls menu allow you to set the white balance  
settings associated with the video clip.  
To select your control settings:  
1. From camcorder mode, press Options (  
2. Select Controls (  
).  
3. Highlight White Balance and press  
4. Use the navigation key to select the desired settings  
).  
.
and press  
.
Using the Zoom  
This feature allows you to zoom in on an object when you  
take a video clip. You can adjust the zoom to five different  
levels.  
To use the zoom:  
1. From camcorder mode, press the navigation key left  
or right to adjust the zoom.  
2. Press Record (  
) or the side camera button to take  
the video clip  
187  
   
Selecting Video Settings  
To select your camcorder settings:  
1. From camcorder mode, press Options (  
).  
2. Select Settings (  
3. Press the navigation key down to highlight one of the  
following options and press  
).  
.
Quality to select the picture quality setting (Fine,  
Normal, or Economy).  
Auto-Erase videos stored in your phone’s memory  
are automatically deleted after they are uploaded  
to an online album.  
188  
 
Storing Videos  
Your phone’s video storage area is called My Videos. There  
are two types of folders in My Videos that can be used  
separately according to your needs:  
In Camcorder (see below)  
Saved to Phone (see page 191)  
In Camcorder Folder  
Once a video is recorded, it is automatically saved to the In  
Camcorder folder. From the In Camcorder folder, you can  
view all of the videos you have taken, store selected videos  
in your phone, send pictures to the Sprint PCS Picture Mail  
Web site, delete videos, and access additional video options.  
To review your stored videos in the In Camcorder folder:  
1. Press Menu (  
2. Select Picture & Video (  
3. Select My Videos (  
).  
) to access the main menu.  
).  
4. Select In Camcorder and press  
. (Thumbnail stills  
will display, up to four at a time.)  
5. Use your navigation key to scroll through and select a  
video.  
6. Select Options (  
)
7. Select Play (  
).  
Press the Side Volume button up or down to adjust the  
video volume while playing a video.  
Tip:  
189  
     
In Camcorder Folder Options  
When you are viewing the videos in the In Camcorder  
folder, press Options (  
) to display the following  
options:  
Play to play the highlighted video clip.  
Upload to upload video clips from the In camcorder  
folder to the Sprint PCS Picture Mail Web site  
(www.sprint.com/picturemail). Depending on your  
settings, you may be prompted to accept a Sprint PCS  
Vision connection. Choose from the following options:  
My Uploads uploads the video clip to the default  
Online Album.  
My Albums uploads video clip to a user specified  
Online Album.  
If this is the first time you have accessed the Sprint PCS  
Picture Mail account, you will be prompted to create your  
Sprint PCS Picture Mail Password. see “Creating Your  
Note:  
Assign to set a movie ID, screen saver, or incoming call.  
Save to Phone allows you to save videos from the In  
Camcorder folder into the phone memory for use as  
assigning videos to ringers or screen savers.  
Video Clips that have been stored in your Saved to Phone  
folder or uploaded to your online account will remain  
available in the In Camera folder until you erase them.  
Note:  
Edit allows you to rename the video clip file and set the  
video lock on or off.  
Erase to delete video clips in the In Camera or Saved to  
Phone folder. Select Erase Selection or Erase All.  
190  
   
Deleting pictures will free up memory space in your phone  
to enable you to take more pictures. Once deleted, pictures  
cannot be uploaded to your online Sprint PCS Picture Mail  
account or saved to the Saved to Phone folder.  
Note:  
Video Info displays the selected clips information  
containing caption name, time and date, clip size,  
uploaded status, resolution, and quality.  
Camcorder to switch to live camcorder mode.  
Thumbnail/Expand to switch the display from expanded  
view to thumbnail view (up to four videos per screen).  
Saved to Phone Folder  
When you assign or download a video, it will automatically  
be saved in the Saved to Phone folder. The Saved to Phone  
folder allows you to store copies of videos on your phone  
and to assign videos to various phone tasks.  
To save a video clip to the Saved to Phone folder:  
1. From the In Camcorder folder (see “In Camcorder  
copy to the Saved to Phone folder and select  
Options (  
). (You may select multiple videos by  
highlighting them and pressing  
mark next to them.)  
to place a check  
If there is no selected video, the currently highlighted video  
will be selected.  
Tip:  
2. Select Saved to Phone (  
) and press  
. (A copy of  
the picture will be saved to the Saved to Phone  
folder.)  
191  
   
Sending Sprint PCS Picture MailSM  
Once you’ve taken a picture or a video, you can use the  
messaging capabilities of your Sprint PCS Vision Picture  
Phone to instantly share it with family and friends. You can  
send a picture or video mail to up to ten people at a time  
using their email addresses or their Sprint PCS Phone  
Numbers.  
Sending Pictures or Videos From the  
In Camera Folder  
To send pictures or videos from the In Camera or Camcorder  
folder:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
).  
3. Select My Pictures (  
) or My Videos (  
).  
4. Select In Camera and press  
5. Highlight the picture or video mail clip you wish to  
send and select Send Msg ( ).  
6. Select one of the following options and press  
.
.
Phone# to enter a mobile phone number directly.  
Email to enter an email address directly.  
Contacts to select recipients from your Contacts.  
Highlight a recipient and press  
.
Other Services to select from a list of other popular  
services.  
Update List this updates the other services list.  
192  
     
7. Press Next (  
) when you are finished adding  
recipients. (You may include up to ten recipients per  
message.)  
8. If you wish to include a text message, scroll to  
Message and press Add (  
using your keypad (or press Options [  
from Preset Msg, Recent Msg, or Emoticons and  
9. If you wish to include audio with the picture, scroll to  
Audio and press Record ( ). To begin recording,  
. (Maximum recording time is ten  
). Enter your message  
] to select  
press  
seconds.)  
10. Confirm the recipients, message, voice memo, and  
picture.  
To change a recipient, highlight the recipient,  
press the appropriate softkey, and follow the  
instructions to select or edit the recipient.  
To change the text message, scroll to Message  
and press the appropriate softkey.  
To change the voice memo, highlight the box  
next to Audio and press the appropriate softkey  
to display options:  
11. Select Send (  
) to send the picture.  
193  
Sending Pictures From Messaging  
You can also send Sprint PCS Picture Mail from your  
phone’s Messaging menu.  
To send pictures from the Messaging menu:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Messaging (  
3. Select Send Message (  
4. Select Picture or Video and press  
5. Select In Camera or In Camcorder and press  
).  
.
. (The  
folder will display up to four thumbnail pictures per  
screen.)  
6. Use the navigation key to display the picture you  
wish to send and select Next (  
).  
7. To complete and send the picture, follow steps 6-11  
To take and send a new picture from Messaging, select  
New Picture during step 5 above, take the new picture, and  
Tip:  
194  
   
Managing Sprint PCS Picture Mail  
Using the Sprint PCS Picture Mail Web Site  
Once you have uploaded pictures from your phone  
to your online Sprint PCS Picture Mail account at  
on page 176), you can use your personal computer to  
manage your pictures. From the Sprint PCS Picture Mail  
Web site (www.sprint.com/picturemail) you can share pictures,  
edit album titles, add captions and organize images. You  
can even send your pictures to be printed at participating  
retail locations.  
You will also have access to picture management tools to  
improve and customize your pictures. You'll be able to  
lighten, darken, crop, add antique effects, add comic  
bubbles and cartoon effects, and use other features to  
transform your pictures.  
To access the Sprint PCS Picture Mail Web site:  
1. From your computer’s Internet connection, go to  
2. Enter your Sprint PCS Phone Number and Sprint PCS  
Picture Mail password to register. (see “Creating Your  
195  
     
Managing Online Pictures and Videos From  
Your Phone  
You can use your phone to manage, edit, or share pictures  
you have uploaded to the Sprint PCS Picture Mail Web site  
Options” on page 176 for information about uploading.)  
To view your online pictures from your phone:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Picture & Video (  
Instead of steps 1 and 2 above, press the camera  
button located on the side of the phone.  
Shortcut:  
3. Select Online Albums (  
).  
4. Select View Albums and press  
. (Depending on  
your settings you may be prompted to accept a  
Sprint PCS Vision connection.) (The My Uploads  
folder and your albums appear.)  
5. Highlight Uploads or an album title and press  
to  
display. (Thumbnail pictures, up to four per screen,  
are displayed.)  
To expand a selected picture from thumbnail to full-screen,  
select Options (Right softkey) and select Expand.  
Tip:  
6. Use your navigation key to select a picture.  
7. Press Options (  
) to display your online picture  
options.  
196  
 
Uploading Pictures or Videos  
To upload pictures or Videos:  
1. Press Menu (  
) to access the main menu.  
2. Select Picture & Video (  
3. Select Online Albums (  
).  
).  
4. Select Upload Pictures or Upload Videos and press  
.
(Thumbnail pictures will display.)  
5. Select the picture(s) or video(s) you wish to upload  
and press Upload (  
6. Highlight Upload Selection or Upload All and  
press  
).  
.
7. Highlight My Uploads or My Albums and press  
.
197  
   
Downloading Your Online Pictures  
From your online Sprint PCS Picture Mail albums display at  
www.sprint.com/picturemail, you can select pictures to  
download to your phone’s Saved to Phone folder.  
To download pictures from the Sprint PCS Picture Mail  
Web site:  
1. From the online pictures or video display, select the  
picture or video mail you wish to download and press  
Options (  
2. Highlight Save To Phone and press  
.
198  
   
Section 2M  
Using Your Phone’s Built-in Media  
Player  
In This Section  
Your Multimedia Channel Options  
Accessing Your Media Player's Channel Listings  
Playing a Video or Audio Clip  
Multimedia FAQs  
Your Sprint PCS Vision Multimedia Phone's built-in media player  
gives you the ability to listen to audio clips and view video clips  
right from your phone's display. It's a great way to stay up-to-  
date with news, weather, and sports information while also  
enjoying the latest blockbuster movie trailers or music  
videos – anywhere, anytime on the Sprint Nationwide PCS  
Network. Just access your media player from your phone's  
main menu, scroll to your choice of channel, and select  
one of the video or audio clips to play. It's like having a TV  
in the palm of your hand.  
This section explains the features and options of your  
phone's built-in media player.  
199  
       
Your Multimedia Channel Options  
Sprint PCS Vision Multimedia Service offers a variety of  
accessible audio or video channels, depending on your  
Sprint PCS Service Plan and multimedia subscriptions.  
Your subscription options include a comprehensive basic  
service as well as a full menu of a variety of additional  
channel options.  
Preview Channel: This free channel lets you sample clips  
from all of the available channels before you make a  
decision to subscribe. It's like viewing the movie  
preview before deciding whether you want to spend  
the money to go see the full motion picture.  
Sprint TVSM: This comprehensive basic service gives you  
access to a variety of content from familiar brands.  
Think of it as “basic cable” for your phone. It allows  
you unlimited access to this content as long as you  
continue to pay the monthly subscription fee.  
Available Individual Channel Options: You also have the  
option of subscribing to individual channels from an  
extensive menu offering. These channels are available  
for a monthly subscription fee and allow you unlimited  
access as long as you continue to pay your monthly  
subscription fee.  
You can always visit www.sprintpcs.com for a comprehensive  
up-to-date Channel Guide, giving you an explanation of the  
available channels as well as information on subscription  
rates.  
200  
   
Accessing Your Media Player's Channel  
Listings  
It's easy to access and view the multimedia Channel  
Listings on your Sprint PCS VisionSM Multimedia Phone  
MM-A880 by Samsung® from the phone's main menu.  
To access your media player and Channel Listings:  
1. Press Menu (  
) from standby mode to display the  
phone's main menu.  
2. Select Media Player (  
).  
3. Select Channel Listing and press  
:
Channel Listing: These include the complimentary Previews  
channel that Sprint provides, as well as any available  
individual channels for which you have purchased access.  
If you have purchased Sprint TV, either through a Sprint  
TV Vision Plan subscription or by purchasing it separately,  
it will be displayed here.  
201  
   
Playing a Video or Audio Clip  
To select and play a media clip:  
1. Press Menu (  
) from standby mode to display the  
phone's main menu.  
2. Select Media Player (  
).  
3. Select a Channel Listing and press  
.
4. Use your keypad to enter a channel number (or  
use your navigation key to scroll to a channel and  
press  
).  
MyChannels: If you have selected a channel that  
you'vealreadysignedupfor(orifit'sachannelwith  
no monthly fee), you will see a list of available clips.  
AvailableChannels: If you have selected a channel  
you have not yet signed up for, you will be  
prompted to accept the corresponding monthly  
charge. Follow the on-screen prompts to subscribe  
totheselectedchannel. (Alist ofavailableclipswill  
display.)  
5. Scroll to the clip you would like to play and press  
Select (  
) or  
. (The clip will automatically load  
and begin playing.)  
202  
   
The first time you access one of your Available Channels,  
you will be prompted to accept the corresponding monthly  
fee (unless it’s a channel that doesn’t have an associated  
monthly fee). Accepting the charge gives you access to the  
channel for as long as you continue to pay the monthly fee.  
If you accept the fee, the next time you access your  
phone’s media player, this channel will appear in the My  
Channels section of your Channel Listings.  
Note:  
Multimedia FAQs  
1. How does my phone's Multimedia Service differ from  
Sprint PCS Video Mail?  
Multimedia Service lets you access high-quality video  
and audio clips provided by external sources. Video  
Mail lets you capture, upload and share videos that  
you personally create with your phone's built-in  
camcorder.  
2. How am I charged for Multimedia Service?  
It depends on whether you sign up for a Sprint PCS  
Vision Plan. Please see the following options below:  
A. Sprint PCS Vision Plan:  
With any Sprint PCS Vision Plan (other than the  
SprintTV Vision Plan), you can play an  
unlimited number of video/audio clips on your  
phone's display as long as you've subscribed to  
a channel (see next bullet). You also receive  
access to the Previews channel as a courtesy  
from Sprint. It doesn't cost you anything to play  
the clips, but you will need to pay a monthly  
fee for any channel subscriptions (see the  
following bullet).  
203  
   
In addition to complimentary access to the  
Previews channel, you can subscribe to any of  
the channels listed in the Available Channels  
section of your Channel Listings for an  
additional monthly fee. Clips within these  
channels will continue to be available to you as  
long as you continue to pay your monthly  
channel subscription fee.  
B. SprintTV Vision Plan:  
With this specific plan, you can play an  
unlimited number of video/audio clips on your  
phone's display and, in addition to the Previews  
channel, this plan includes the SprintTV  
Channel, giving you a comprehensive selection  
of audio/video clips from a variety of brands  
you know. It doesn't cost you anything to play  
the clips, but you will need to pay a monthly  
fee for any additional channels to which you  
subscribe (see the following bullet).  
For a monthly subscription fee, you can  
purchase access to a variety of other channels  
located in the Available Channels section of  
your Channel Listings. Clips within these  
channels will continue to be available to you as  
long as you continue to pay your monthly  
channel subscription fee.  
C. Any plan other than a Sprint PCS Vision Plan:  
If you do not sign up for a Sprint PCS Vision  
Plan (of any kind), your Sprint PCS Multimedia  
Phone still has the capability of playing audio or  
video clips, but you WILL be charged a fee for  
playing them (this includes any of the clips in  
204  
the Previews channel). The charge for playing  
the clip is based the clip's size and scope, and  
will vary depending on the clip.  
You will be charged a monthly subscription fee  
for any of the Available Channels you acquire  
access to (with the exception of the Previews  
channel, which is included as a courtesy from  
Sprint). If you purchase access to an Available  
Channel, clips within the channel will continue  
to be available to you as long as you continue to  
pay your monthly channel subscription fee.  
3. Will I know if I'm receiving an incoming call while I'm  
viewing or listening to an audio clip?  
No. All incoming calls will roll into voicemail while  
you are playing a clip. If the caller leaves a voicemail,  
the voicemail icon will appear on the screen.  
4. How long are the clips? Will I know the estimated time it  
will take to play the clip prior to accessing it?  
Once you have selected a channel, you will see a  
listing of the available clips, with the clip's length  
appearing after the clip's title. In general, a clip's  
duration will depend on the story or content being  
provided, and can be fairly short or as long as a few  
minutes.  
5. Can I access a multimedia clip wherever I am, as long as I  
have my phone?  
As long as you are on the Sprint Nationwide PCS  
Network, you will have access to the audio and video  
clips.  
205  
Multimedia Service does not work while roaming off of the  
Sprint Nationwide PCS Network or where service is  
unavailable.  
Note:  
6. Are the videos that I'm viewing “live” videos?  
Not yet. This service currently provides media on  
demand with video and audio clips that are refreshed  
throughout the day, but that are not “live.” A menu of  
live media streams should become available later in  
2005.  
7. After purchasing access to an Available Channel for a  
monthly fee, do I receive any confirmation? That is, how do I  
know it has been purchased?  
The next time you access your media player's  
Channel Listings, the purchased channel title and  
corresponding number will appear in the My  
Channels section.  
8. Why are some channels already pre-loaded into the My  
Channels section?  
Some channels, such as Previews, are offered free of  
charge as a customer courtesy. These channels  
automatically appear in the My Channels section of  
your Channel Listings.  
9. If I don't subscribe to Sprint PCS Vision Plan, am I still able  
to view the multimedia clips?  
Yes; for service access charges, please see option “C”  
in question 2 above.  
10. How can I easily access a channel without having to scroll  
through all the channels in my Channel Listings?  
Each channel will have a number to the left of it. You  
206  
can simply press this number to quickly access the  
clips located within that channel.  
When entering the specific channel number, channels 01 -  
09 do not require you to enter a “0.” For example, to access  
channel “07,” just press the “7” key.  
Tip:  
11. What does it mean when the video pauses and I see the  
word “loading” at the bottom of the screen?  
This happens when the media player is in the process  
of loading the data necessary to play the clip. It  
typically occurs when there is heavy traffic on the  
network.  
12. How can I cancel service if I decide I don't want it?  
To cancel your Multimedia Service, visit  
www.sprintpcs.com and sign on to My PCS with your  
account number and password. From this page you  
have the ability to cancel the service and/or any  
Available Channels to which you subscribe.  
13. If I place my stereo headphones on and insert them into the  
phone's headset jack, can I flip the phone closed while I am  
playing an audio (or video) clip without interrupting the  
clip?  
Yes. When you insert your stereo headset into the  
phone's headset jack, the phone automatically goes  
into “headset mode,” allowing you to flip the phone  
closed and continue playing the clip (likewise, if your  
phone is in “headset mode,” a phone call will not  
become disconnected by flipping the phone closed).  
207  
14. Can I surf to a different channel while I am playing a clip?  
Yes; while you are playing a clip, you can use the up  
and down navigation buttons to surf to a different  
channel. A small pop-up screen will appear that tells  
you which channel you are watching as well as other  
channels you have access to. Use the navigation  
buttons to scroll through the different channels.  
Once you find a channel that you want to watch,  
scroll to it and press  
(or simply wait  
approximately three seconds) and the channel will  
begin loading.  
208  
 
Section 3  
Sprint PCS Service Features  
 
210  
Section 3A  
Sprint PCS Service Features:  
The Basics  
In This Section  
Now that you’ve mastered your phone’s fundamentals, it’s time  
to explore the calling features that enhance your Sprint PCS  
Service. This section outlines your basic Sprint PCS Service  
features.  
211  
   
Using Voicemail  
Setting Up Your Voicemail  
All unanswered calls to your Sprint PCS Phone are  
automatically transferred to your voicemail, even if your  
phone is in use or turned off. Therefore, you will want to  
set up your Sprint PCS Voicemail and personal greeting as  
soon as your phone is activated.  
To set up your voicemail:  
1. Press and hold  
.
2. Follow the system prompts to:  
Create your pass code  
Record your greeting  
Record your name announcement  
Choose whether or not to activate One-Touch  
Message Access (a feature that lets you access  
messages simply by pressing and holding  
bypassing the need for you to enter your pass  
code).  
,
The voicemail setup process may vary in certain Affiliate  
areas.  
Note:  
212  
         
Voicemail Notification  
There are several ways your Sprint PCS Phone alerts you of  
a new message:  
By displaying  
at the top of your screen.  
By displaying a message on the screen.  
By sounding the assigned ringer type.  
By the LED blinking red.  
New Voicemail Message Alerts  
When you receive a new voice message, your phone alerts  
you and prompts you to call your voicemail.  
To call your voicemail:  
Press and hold  
To display your missed calls:  
Press the navigation key up.  
.
When you are roaming off the Sprint Nationwide  
PCS Network, you may not receive notification of  
new voicemail messages. It is recommended that  
you periodically check your voicemail by dialing 1  
+ area code + your Sprint PCS Phone number.  
Important  
When your voicemail answers, press ( ) and enter  
*
your pass code. You will be charged roaming rates  
when accessing voicemail while roaming off the  
Sprint Nationwide PCS Network.  
Your phone accepts messages even when it is turned off.  
However, you are only notified of new messages when your  
phone is turned on and you are in a Sprint PCS Service Area.  
Note:  
213  
   
Retrieving Your Voicemail Messages  
You can review your messages directly from your Sprint PCS  
Phone or from any other touch-tone phone. To dial from  
your Sprint PCS Phone, you can either speed dial your  
voicemail or use the menu keys.  
Using One-Touch Message Access  
Press and hold  
voicemail box.)  
. (Your phone will dial your  
Using the Menu Keys on Your Phone to Access Your  
Messages  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Voicemail (  
).  
).  
4. Select Call Voicemail (  
) to listen to your messages.  
You are charged for airtime minutes when you are  
accessing your voicemail from your Sprint PCS Phone.  
Note:  
Using a Phone Other Than Your Sprint PCS Phone to  
Access Messages  
1. Dial your Sprint PCS Phone number.  
2. When your voicemail answers, press the Asterisk (*)  
key.  
3. Enter your pass code.  
When you call into voicemail, you first hear the header  
information (date, time, and sender information) for the  
message. To skip directly to the message, press 4 during  
the header.  
Tip:  
214  
   
Voicemail Button Guide  
Here’s a quick guide to your keypad functions while  
listening to voicemail messages. For further details and  
Date/Time Send Reply Advance  
Replay  
Erase  
Rewind  
Forward  
Save  
Call Back  
Cancel  
Help  
Skip  
215  
Voicemail Options  
Your Sprint PCS Phone offers several options for  
organizing and accessing your voicemail.  
Using Expert Mode  
Using the Expert Mode setting for your personal voicemail  
box helps you navigate through the voicemail system more  
quickly by shortening the voice prompts you hear at each  
level.  
To turn Expert Mode on or off:  
1. Press and hold  
to access your voicemail. (If your  
voicemail box contains any new or saved messages,  
press  
to access the main voicemail menu.)  
2. Press  
to change your Personal Options, following  
the system prompts.  
3. Press  
for Expert Mode.  
4. Press  
to turn Expert Mode on or off.  
Setting Up Group Distribution Lists  
Create up to 20 separate group lists, each with up to 20  
customers.  
1. Press and hold  
to access your voicemail. (If your  
voicemail box contains any new or saved messages,  
press  
to access the main voicemail menu.)  
2. Press  
to change your Personal Options, following  
the system prompts.  
3. Press  
for Administrative Options.  
216  
   
4. Press  
for Group Distribution Lists.  
5. Follow the voice prompts to create, edit, rename, or  
delete group lists.  
Sprint PCS Callback  
Return a call after listening to a message without  
disconnecting from voicemail.  
Press  
after listening to a message. (Once the call  
is complete, you’re returned to the voicemail main  
menu.)  
Voicemail-to-Voicemail Message  
Record and send a voice message to other Sprint PCS  
Voicemail users.  
1. From the main voicemail menu, press  
to send a  
message.  
2. Follow the voice prompts to enter the phone  
number.  
3. Follow the voice prompts to record and send your  
voice message.  
Voicemail-to-Voicemail Message Reply  
Reply to a voice message received from any other Sprint PCS  
Voicemail user.  
1. After listening to a voice message, press  
.
2. Follow the voice prompts to record and send your  
reply.  
217  
Voicemail-to-Voicemail Message Forwarding  
Forward a voice message, except those marked “Private,”  
to other Sprint PCS Voicemail users.  
1. After listening to a message, press  
.
2. Follow the voice prompts to enter the phone  
number.  
3. Follow the voice prompts to record your introduction  
and forward the voice message.  
Voicemail-to-Voicemail Receipt Request  
Receive confirmation that your voice message has been  
listened to when you send, forward, or reply to other  
Sprint PCS users.  
1. After you have recorded a message, press  
to  
indicate you are satisfied with the message you  
recorded.  
2. Press  
3. Press  
to mark receipt requested.  
to send your voicemail message.  
Continue Recording  
When leaving a voice message, you can choose to continue  
recording even after you’ve stopped.  
Before pressing  
to indicate that you are satisfied  
with the message you recorded, press  
continue recording.  
to  
218  
Extended Absence Greeting  
When your phone is turned off or you are off the Sprint  
Nationwide PCS Network for an extended period, this  
greeting can be played instead of your normal personal  
greeting.  
1. From the main voicemail menu, press  
for  
Personal Options.  
2. Press  
for greetings.  
to record an Extended Absence Greeting.  
3. Press  
Clearing the Message Icon  
Your phone may temporarily continue to display the  
message icon after you have checked your voice and text  
messages.  
To clear the icon from the display screen:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Voicemail (  
).  
).  
4. Select Clear Envelope (  
).  
219  
 
Voicemail Menu Key  
Following the prompts on the voicemail system, you can  
use your keypad to navigate through the voicemail menu.  
The following list outlines your phone’s voicemail menu  
structure.  
Listen  
Envelope Information  
Reply  
Advance 8 Seconds  
Replay  
Rewind  
Forward Message  
Erase  
Callback  
Save  
Options  
Send a Message  
Personal Options  
Notification Options  
Phone Notification  
Numeric Paging to a Sprint PCS Phone  
Return to Personal Options Menu  
Administrative Options  
Skip Pass code  
Autoplay  
Message Date & Time On/Off  
220  
   
Change Pass code  
Group Distribution List  
Return to Personal Options Menu  
Greetings  
Personal Greetings  
Name Announcement  
Extended Absence Greeting  
Return to Personal Options Menu  
Expert Mode (On/Off)  
Place a Call  
Disconnect  
221  
Using SMS Text Messaging  
With SMS Text Messaging, you can use a person’s wireless  
phone number to send instant text messages from your  
Sprint PCS Phone to their messaging-ready phone – and  
they can send messages to you. When you receive a new  
message, it will automatically display on your phone’s  
screen.  
In addition, SMS Text Messaging includes a variety of pre-set  
messages, such as “I’m running late, I’m on my way,that  
make composing messages fast and easy. You can also  
customize your own pre-set messages (up to 128 characters)  
from your Sprint PCS Phone or at www.sprintpcs.com.  
Composing SMS Text Messages  
To compose an SMS Text message:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Messaging (  
3. Select Send Message (  
).  
4. Select Text and press  
.
5. Select Mobile #, Email, or Contacts and press  
6. Enter the number, email address, or select the contact  
and select Next ( ) or . (You may include up to  
10 recipients per message.)  
.
7. Compose a message using one of the following  
methods:  
222  
       
To type a message, use your keypad to enter your  
message. Use to select a character input  
To use a preset message or a emoticon, select  
Options (  
) and select Preset Msg (  
), Recent  
Msg (  
), or Emoticons ( ). Press the number  
on the keypad that corresponds to the number  
next to the message or emoticon.  
8. Select Next (  
9. Review your message and press Send (  
may also select the following additional messaging  
options by pressing Options [ ]:  
Edit to edit the existing message before sending.  
).  
). (You  
Priority to set the message priority level  
[Normal or Urgent].  
Call Back # to set the callback number  
Save to Drafts to save the message without sending.  
Accessing SMS Text Messages  
To read an SMS Text message:  
When you receive a text message, it will  
automatically appear on your phone’s main display  
screen. Use your navigation key to scroll down and  
view the entire message.  
223  
 
To reply to an SMS Text message:  
1. While the message is open, select Reply (  
).  
2. Compose your reply or use the pre-set messages or  
icons.  
To type a message, use your keypad to enter your  
message. Use to select a character input  
To use a preset message or a emoticon, select  
Options (  
) and select Preset Msg (  
), Recent  
Msg (  
), or Emoticons ( ). Press the number  
on the keypad that corresponds to the number  
next to the message or emoticon.  
3. Select Next (  
4. Review your message and press Send (  
may also select the following additional messaging  
options by pressing Options [ ]:  
Edit to edit the existing message before sending.  
).  
). (You  
Priority to set the message priority level  
[Normal or Urgent].  
Call Back # to set the callback number  
Save to Drafts to save the message without sending.  
224  
Using Preset (Canned) Messages  
Pre-set messages make sending text messages to your  
friends, family, and co-workers easier than ever.  
To add and/or edit Pre-Set Messages:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
3. Select Settings (  
).  
).  
4. Select Preset Messages (  
).  
5. Highlight an empty location and select Edit (  
).  
– or –  
Highlight a message you wish to edit and select  
Edit (  
).  
6. Enter your new message or changes and select Done  
(
You may also add or edit Canned (Pre-set) Messages in the  
“My Online Tools” area at www.sprintpcs.com  
Note:  
225  
   
Using Caller ID  
Caller ID allows people to identify a caller before  
answering the phone by displaying the number of the  
incoming call. If you do not want your number displayed  
when you make a call, just follow these easy steps.  
To block your phone number from being displayed for a  
specific outgoing call:  
1. Press  
.
2. Enter the number you want to call.  
3. Press  
.
To permanently block your number, call Sprint Customer  
Service.  
226  
   
Responding to Call Waiting  
When you’re on a call, Call Waiting alerts you of incoming  
calls by sounding two beeps. Your phone’s screen informs  
you that another call is coming in and displays the caller’s  
phone number (if it is available and you are in digital  
mode).  
To respond to an incoming call while you’re on a call:  
Press  
answers the second call.)  
To switch back to the first caller:  
. (This puts the first caller on hold and  
Press  
again.  
For those calls where you don’t want to be interrupted, you  
can temporarily disable Call Waiting by pressing *70 before  
placing your call. Call Waiting is automatically reactivated  
once you end the call.  
Tip:  
227  
   
Making a Three-Way Call  
With Three-Way Calling, you can talk to two people at the  
same time. When using this feature, the normal airtime  
rates will be charged for each of the two calls.  
To make a Three-Way Call:  
1. Enter a number you wish to call and press  
2. Once you have established the connection, enter the  
second number you wish to call and press  
. (This  
.
puts the first caller on hold and dials the second  
number.)  
3. When you’re connected to the second party, press  
again to begin your three-way call.  
If one of the people you called hangs up during your call,  
you and the remaining caller stay connected. If you  
initiated the call and are the first to hang up, all three  
callers are disconnected.  
Call Waiting and Three-Way Calling are not available while  
roaming off the Sprint Nationwide Network.  
Note:  
228  
     
Using Call Forwarding  
Call Forwarding lets you forward all your incoming calls to  
another phone number – even when your phone is turned  
off. You can continue to make calls from your phone when  
Call Forwarding is activated.  
To activate Call Forwarding:  
1. Press  
.
2. Enter the area code and phone number to which your  
future calls should be forwarded.  
3. Press  
. (You will hear a tone to confirm the  
activation of Call Forwarding.)  
To deactivate Call Forwarding:  
1. Press  
.
2. Press  
. (You will hear a tone to confirm the  
deactivation.)  
You are charged a higher rate for calls you have forwarded.  
Note:  
229  
   
Missed Events  
Missed events is a simple way of viewing all missed calls,  
missed tasks, scheduler events, etc. A list is displayed on-  
screen that allows you to scroll through all the events using  
the navigation key.  
To view missed events:  
From the standby by screen, press the navigation key  
up to view the Missed Events screen.  
230  
   
Section 3B  
SM  
Sprint PCS Vision  
In This Section  
SM  
Sprint PCS Vision brings you clarity you can see and hear with  
advanced multimedia services. These features – including  
Sprint PCS Messaging, games, downloadable ringers and  
screen savers, and portable Web access – are easy to learn  
and use. Clearly, it’s a whole new way to look at wireless.  
This section introduces these advanced services and walks  
you through the necessary steps to start taking advantage of  
Sprint PCS Vision Services.  
Section 3B: Sprint PCS Vision  
231  
       
Sprint PCS Vision Applications  
Here is a brief list of the applications available through  
your Sprint PCS Vision Phone. For more information,  
please see the Sprint PCS Vision User Guide online at  
SM  
Sprint PCS Picture Mail Take digital pictures with your  
Sprint PCS Vision Picture Phone and send them to  
email addresses or to other Sprint PCS Vision Phones.  
Sprint PCS Video Mail Shoot video clips with sound and  
share them with friends and family right from your  
Sprint PCS Vision Video Phone.  
Messaging Send and receive emails and chat on your  
Sprint PCS Vision Phone.  
Multimedia See and hear the latest news, sports,  
weather and more in full-color video and vivid sound  
while on the go.  
Games Play exciting games with full-color graphics,  
sound, and vibration. Choose from over 250 games to  
play anytime.  
Ringers Personalize your Sprint PCS Vision Phone by  
downloading and assigning different ringers to  
numbers in your contact list.  
Screen Savers Download unique images to use as  
screen savers – or make it easy to tell who’s calling by  
assigning specific images to numbers in your contact  
list.  
Web Experience full-color graphic versions of popular  
Web sites from your Sprint PCS Vision Phone.  
232  
Section 3B: Sprint PCS Vision  
   
Getting Started With Sprint PCS Vision  
With your Sprint PCS Vision Phone and Sprint PCS Service,  
you are ready to start enjoying the advantages of Sprint  
PCS Vision. This section will help you learn the basics of  
using your Sprint PCS Vision services, including managing  
your User name, launching a Vision connection, and  
navigating the Web with your Sprint PCS Vision Phone.  
Your User Name  
When you buy a Sprint PCS Vision Phone and sign up for  
service, you're automatically assigned a User name, which  
is typically based on your name and a number, followed by  
“@sprintpcs.com.” (For example, the third John Smith to  
sign up for Sprint PCS Vision services might have  
jsmith003@sprintpcs.com as his User name.)  
When you use Sprint PCS Vision services, your User name  
is submitted to identify you to the Sprint Nationwide PCS  
Network. The User name is also useful as an address for  
Sprint PCS Mail, as a way to personalize Web services, and  
as an online virtual identity.  
Your User name will be automatically programmed into  
your Sprint PCS Vision Phone. You don't have to enter it.  
Section 3B: Sprint PCS Vision  
233  
     
Finding Your User Name  
If you aren't sure what your Sprint PCS Vision User name  
is, you can easily find it online or on your Sprint PCS Vision  
Phone.  
To find your User Name:  
At www.sprintpcs.com. Sign on to your account using  
your Sprint PCS Phone number and Password. To  
display your User name, click on the My Personal  
Information menu, then click on PCS Vision User Name.  
On your Sprint PCS Vision Phone. You can find your User  
name under the Phone Info option in your phone's  
Settings menu (Menu > Settings > Phone Info> Phone  
Number).  
234  
Section 3B: Sprint PCS Vision  
Launching a Sprint PCS Vision Connection  
To launch a Sprint PCS Vision connection:  
1. Press Menu ( ) to access the main menu.  
2. Select Web (  
). (Your Sprint PCS Vision connection  
will launch and the Sprint PCS Vision home page will  
display.)  
The Sprint PCS Vision Home Page  
If Net Guard is enabled and displayed (see page 236), press  
OK (right softkey) to continue and launch the Web.  
Note:  
If you had a previous Sprint PCS Vision connection, the last  
page you visited will display when you launch your  
browser. When this occurs, you may not see the  
“Connecting...” message when you launch the session.  
Though the browser is open, you are not currently in an  
active data session - that is, no data is being sent or  
received. As soon as you navigate to another page, the  
active session will launch and you will see the  
“Connecting...” message.  
Section 3B: Sprint PCS Vision  
235  
     
Net Guard  
When you first connect to the Web, the Net Guard will  
appear to confirm that you want to connect. This feature  
helps you avoid accidental connections. You can disable  
the Net Guard in the future by selecting Always Auto-  
Connect when the Net Guard is displayed.  
To change your Net Guard settings:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Settings (  
3. Select Sprint PCS Vision (  
4. Select Net Guard (  
).  
).  
On to activate the Net Guard.  
Off to deactivate the Net Guard.  
When enabled, the Net Guard appears only once per  
session. The Net Guard does not appear if the phone is  
merely re-connecting due to a time-out.  
Note:  
236  
Section 3B: Sprint PCS Vision  
   
Sprint PCS Vision Connection Status and  
Indicators  
Your phone's display lets you know the current status of  
your Sprint PCS Vision connection through indicators  
which appear at the top of the screen. The following  
symbols are used:  
Your Sprint PCS Vision connection is active (data is  
being transferred); the transmit/receive symbol will  
blink to indicate data transmission. Incoming voice  
calls go directly to voicemail; outgoing voice calls  
can be made, but the Sprint PCS Vision connection  
will terminate.  
Your Sprint PCS Vision connection is dormant (no  
data is being sent or received). Though not currently  
active, when dormant the phone can restart an  
active connection quickly; voice calls can be made  
and received.  
Your phone is not currently able to access Sprint  
PCS Vision service features.  
If no indicator appears, your phone does not have a current  
Sprint PCS Vision connection. To launch a connection, see  
Section 3B: Sprint PCS Vision  
237  
 
Navigating the Web  
Navigating through menus and Web sites during a  
Sprint PCS Vision session is easy once you've learned  
a few basics. Here are some tips for getting around:  
Softkeys  
During a Sprint PCS Vision session, the bottom line of your  
phone's display contains one or more softkeys. These keys  
are shortcut controls for navigating around the Web, and  
they correspond to the softkey buttons directly below the  
phone’s display screen.  
Depending on which Web sites you visit, the labels on the  
softkeys may change to indicate their function.  
Tip:  
To use softkeys:  
Press the desired softkey button. (If an additional  
pop-up menu appears when you press the softkey  
button, select the menu items using your keypad [if  
they’re numbered] or by highlighting the option and  
pressing  
.)  
Scrolling  
As with other parts of your phone's menu, you'll have to  
scroll up and down to see everything on some Web sites.  
To scroll line by line through Web sites:  
Press the navigation key up and down.  
To scroll page by page through Web sites:  
Press the volume buttons on the side of the phone.  
238  
Section 3B: Sprint PCS Vision  
   
Selecting  
Once you've learned how to use softkeys and scroll, you  
can start navigating the Web.  
To select on-screen items:  
Use the navigation key to highlight the desired item,  
then press the desired softkey button (or press  
).  
You’ll find that the left softkey is used primarily for selecting  
items. This softkey is often labeled “OK.”  
Tip:  
If the items on a page are numbered, you can use your  
keypad (number keys) to select an item. (the tenth item in a  
numbered list may be selected by pressing the 0 key on  
your phone’s keypad, even though the number 0 doesn’t  
appear on the screen.)  
Links, which appear as underlined text, allow you to jump  
to different Web pages, select special functions, or even  
place phone calls.  
To select links:  
Highlight the link and press the appropriate softkey.  
Going Back  
To go back one page:  
Press the  
key on your phone.  
The BACK key is also used for deleting text (like a  
BACKSPACE key) when you are entering text.  
Note:  
Section 3B: Sprint PCS Vision  
239  
Going Home  
To return to the Sprint PCS Vision home page from any  
other Web page:  
Press and hold  
– or –  
.
Press Menu (  
) and select Home (  
).  
Sprint PCS Messaging  
Accessing Messaging  
Now you can send and receive emails and text messages  
and participate in Web-based chatrooms right from your  
Sprint PCS Vision Phone. Messaging allows you to stay  
connected to friends, family, and co-workers 24 hours a  
day anywhere on the Sprint Nationwide PCS Network.  
Message Types  
There are many types of text messaging available on your  
phone. These include SMS Text Messaging (page 222),  
Instant Messaging, Email, and Chat.  
(Sprint PCS Voicemail provides voicemail-to-mailbox  
messaging. For information on using your phone’s  
240  
Section 3B: Sprint PCS Vision  
         
Accessing Sprint PCS Mail  
Sprint PCS Mail allows you to perform many of the typical  
email functions from your Sprint PCS Vision Phone that  
you can from your personal computer. You can manage  
your Sprint PCS Mail account from your Sprint PCS Vision  
Phone or from your personal computer at  
To access Sprint PCS Mail from your phone:  
1. Press Menu (  
) to access the main menu.  
2. Select Messaging (  
).  
3. Select Email (  
). (If you’re a first-time user, your  
phone will prompt you to set up your Sprint PCS Mail  
account by establishing a User name and password.)  
4. Select the folder you wish to view, such as Inbox (  
or Compose (  
).  
)
For information and instructions about reading, replying to,  
and composing Sprint PCS Mail, please see the Sprint PCS  
Vision User’s Guide at www.sprintpcs.com.  
Section 3B: Sprint PCS Vision  
241  
   
Accessing Additional Email Providers  
With Sprint PCS Vision, you can use popular email services  
®
®
such as AOL Mail, Yahoo! Mail, MSN Hotmail and  
®
EarthLink to keep in touch, even while you’re on the go.  
To access email providers from your Sprint PCS Vision  
Phone:  
1. From the Sprint PCS Vision home page, select  
Messaging (  
).  
2. Select Email (  
).  
3. Select an email provider, such as PCS Mail, AOL Mail,  
MSN Hotmail, Yahoo! Email, or Earthlink.  
4. Use your keypad to enter the required sign-in  
information for the selected provider, such as user  
name, email address, and/or password, and select  
Sign In. (Your mailbox for the selected provider will  
display.)  
The information required for sign in will vary depending on  
the email provider you are accessing.  
Note:  
5. Follow the on-screen instructions to read, reply to,  
compose, send, and manage your email account.  
242  
Section 3B: Sprint PCS Vision  
   
Accessing Instant Messaging  
Sprint PCS Vision also provides you with access to popular  
®
instant messaging (IM) clients, including AOL Instant  
TM  
®
®
Messenger , MSN Messenger, and Yahoo! Messenger.  
To access instant messaging clients from your Sprint PCS  
Vision Phone:  
1. From the Sprint PCS Vision home page, select  
Messaging (  
).  
2. Select Instant Messaging (  
).  
3. Select an email provider, such as AOL Instant  
Messenger, MSN Messenger, or Yahoo! Messenger.  
4. Use your keypad to enter the required sign in  
information for the selected provider, such as user  
name and/or password, and select Sign On for AOL and  
Sign In for Hotmail and Yahoo. (Your IM screen for the  
selected provider will display.)  
The information required for sign in will vary depending on  
the instant messaging provider you are using.  
Note:  
5. Follow the on-screen instructions to read, reply to,  
compose, send, and manage your IM account.  
Section 3B: Sprint PCS Vision  
243  
   
Accessing Wireless Chatrooms  
Sprint PCS Vision gives you the ability to join wireless  
chatrooms from your Sprint PCS Vision Phone, to send text  
messages and icons to chatroom participants, or to launch  
a one-on-one (private) chatroom.  
To access a chatroom from the browser:  
1. Press Menu (  
) to access the main menu.  
).  
2. Select Web (  
3. Select Messaging (  
).  
4. Select Chat (  
).  
5. Select Jumbuck (  
). (You will see a disclaimer for  
) to accept the disclaimer.  
Wireless Chat.)  
6. Select Agree (  
7. Use your keypad to enter a nickname and select Enter.  
(The chat menu will display.)  
8. Select a chatroom from the menu (for example,  
“Friends” or “Singles”) and press Go (  
) to enter.  
9. Once in the chatroom, you may scroll through the  
postings to read messages from other chatroom  
participants and use your keypad to enter your own  
messages.  
For information about posting to chatrooms or setting up  
one-on-one sessions, please see the Sprint PCS Vision  
User’s Guide at www.sprintpcs.com.  
Note:  
244  
Section 3B: Sprint PCS Vision  
   
Downloading Premium Services  
Content  
With Sprint PCS Vision and your new Sprint PCS Vision  
Phone, you have access to a dynamic variety of Premium  
Service content, such as downloadable Games, Ringers,  
Screen Savers, and other applications. (Additional charges  
may apply.) The basic steps required to access and  
download Premium Service content are outlined below.  
Accessing the Download Menus  
To access the Sprint PCS Vision download menus:  
1. Press Menu (  
2. Select Downloads (  
3. Select the type of file you wish to download (Games,  
Ringers, Screen Savers, or Applications) and press  
4. Select Get New and press  
) to access the main menu.  
).  
.
.
To access the Sprint PCS Vision download menus from  
the Web browser:  
1. From the Sprint PCS Vision home page, select  
Downloads (  
).  
2. Select Games (  
), Ringers (  
), Screen Savers  
(
), or Applications ( ) to go to the  
corresponding download menu. (For more  
information on navigating the Web, see “Navigating  
Section 3B: Sprint PCS Vision  
245  
     
Selecting an Item to Download  
You can search for available items to download in a  
number of ways:  
Featured displays a rotating selection of featured items.  
Categories allows you to narrow your search to a  
general category, such as Movie/TV Themes for Ringers  
or College Logos for Screen Savers. (There may be  
several pages of available content in a list. Select Next 9  
to view additional items.)  
Search allows you to use your keypad to enter search  
criteria to locate an item. You may enter an entire word  
or title or perform a partial-word search (for example,  
entering “goo” returns “Good Ol’ Boy,The Good, the  
Bad, and the Ugly,and “Goofy - Club”).  
Downloading an Item  
Once you’ve selected an item you wish to download,  
highlight it and press  
or press OK (  
). You will see  
a summary page for the item including its title, the vendor,  
the download detail, the file size, and the cost. Links allow  
you to view the License Details page, which outlines the  
price, license type, and length of license for the download,  
and the Terms of Use page, which details the Premium  
Services Terms of Use and your responsibility for payment.  
To download a selected item:  
1. From the information page, select Buy. (The item will  
download automatically. When the New Download  
screen appears, the item has been successfully  
downloaded to your phone.)  
246  
Section 3B: Sprint PCS Vision  
If you have not previously purchased an item, you will be  
prompted to create your purchasing profile.  
Note:  
2. Select an option to continue:  
Select Use (  
) to assign the downloaded item  
(or to launch, in the case of a game or  
application). Your Sprint PCS Vision session will  
end and you will be redirected to the appropriate  
phone menu screen.  
Select Shop (  
purchase and download.  
) to browse for other items to  
Press  
to quit the browser and return to  
standby mode.  
Using My Content Manager  
Whether you purchase your Premium Services content  
from your Sprint PCS Phone or from your online account  
management page at www.sprintpcs.com, all of your  
purchases are stored in My Content Manager and may be  
downloaded to your phone from there.  
My Content Manager is a storage area on the enhanced  
Sprint Nationwide PCS Network that is assigned  
specifically to your account. It allows you to store all of  
your Premium Service downloadable files. The files remain  
in My Content Manager until their license terms have  
expired – even after you have downloaded the content to  
your phone. This provides you with a convenient place to  
access information about your downloaded files without  
having to store the information in your phone’s memory.  
Section 3B: Sprint PCS Vision  
247  
 
To access My Content Manager:  
1. From the Sprint PCS Vision home page, select  
Downloads (  
).  
2. Select My Content Manager (  
).  
To download purchased content from My Content Manager:  
1. From the My Content Manager display (see above),  
highlight the item you wish to download and  
press  
. (The information page for the selected  
item will display.)  
2. Scroll to highlight Download and press  
. (The item  
will download automatically. When the New  
Download screen appears, the item has been  
successfully downloaded to your phone.)  
3. Select an option to continue:  
Select Use (left softkey) to assign the downloaded  
item (or to launch, in the case of a game or  
application). Your Sprint PCS Vision session will  
end and you will be redirected to the appropriate  
phone menu screen.  
Select Shop (right softkey) to browse for other  
items to download.  
Press  
to quit the browser and return to  
standby mode.  
For complete information and instructions on downloading  
Games, Ringers, Screen Savers, and Applications, see the  
Sprint PCS Vision User’s Guide at www.sprintpcs.com.  
248  
Section 3B: Sprint PCS Vision  
Web  
Exploring the Web  
With Web access on your Sprint PCS Vision Phone, you  
can browse full-color graphic versions of your favorite  
Web sites, making it easier than ever to stay informed  
while on the go. Follow sports scores and breaking news  
and weather and shop on your Sprint PCS Vision Phone  
anywhere on the Sprint Nationwide PCS Network.  
In addition to the features already covered in this section,  
the Sprint PCS Vision home page offers access to these  
colorful, graphically rich Web categories, including News,  
Weather, Entertainment, Sports, Finance, Travel, Shopping, Tools,  
and Business Links, as well as useful management options  
including My Account and Search. Many sites are available  
under more than one menu – choose the one that's most  
convenient for you.  
Using the Browser Menu  
Navigating the Web from your phone using the Sprint PCS  
Vision home page is easy once you get the hang of it. For  
details on how to navigate the Web, select menu items,  
Although the Sprint PCS Vision home page offers a broad  
and convenient array of sites and services for you to  
browse, not all sites are represented, and certain functions,  
such as going directly to specific Web sites, are not  
available. For these and other functions, you will need to  
use the browser menu. The browser menu offers  
Section 3B: Sprint PCS Vision  
249  
         
additional functionality to expand your use of the Web on  
your Sprint PCS Vision Phone.  
Opening the Browser Menu  
The browser menu may be opened anytime you have an  
active Sprint PCS Vision session, from any page you are  
viewing.  
To open the browser menu:  
Press the right softkey. (The browser menu will  
display in a drop-down list.)  
Options available under the browser menu include:  
Home (  
). Returns the browser to the Sprint PCS  
Vision home page.  
Forward (  
). Returns you to a previously viewed page  
(after having used the  
key).  
Mark this Page (  
current page.  
). Creates a new bookmark for the  
View Bookmarks (  
). Allows you to bookmark the  
current site, access bookmarked sites, and manage your  
bookmarks.  
Search (  
Send page to (  
current page via Messaging to another user.  
Go to URL ( ). Allows you to navigate directly to a  
Web site by entering its URL (Web site address).  
History ( ). Keeps a list of links to your most recently  
). Launches a Google search.  
). Allows you to send the URL of the  
visited sites. To navigate to a site, highlight it and press  
, then select Connect.  
250  
Section 3B: Sprint PCS Vision  
Refresh this page (  
). Reloads the current Web page.  
More ( ). Displays the following options:  
Show URL Displays the URL of the page being  
displayed.  
Restart Browser Restarts the browser application.  
About Browser Displays technical information  
about the browser, its version, and the encryption  
version, and provides links to Certificate  
Information for the various components.  
Preferences Displays the following advanced  
options:  
Edit homepage URL Allows you to change your  
browser’s home page.  
Revert to default homepage Changes the current  
homepage back to the default homepage URL.  
Font Size Allows you to change the fonts size.  
Color Allows you to change the color scheme in  
the browser.  
Show Images Allows you to turn on or off  
images displayed in the browser.  
Cookies Allows you to clear the cookies set in  
the browser.  
Title Tag Allows you to turn on or off the titles  
displayed in the browser.  
Send Referrer Allows you to turn on or off the  
send referrer.  
Section 3B: Sprint PCS Vision  
251  
Creating a Bookmark  
Bookmarks allow you to store the address of your favorite  
Web sites for easy access at a later time.  
To create a bookmark:  
1. Go to the Web page you want to mark.  
2. Press  
3. Select Mark this Page (  
4. Select Save ( ).  
to open the browser menu.  
).  
Bookmarking a page does not store the page contents, just  
its address.  
Note:  
Some pages cannot be bookmarked. Whether a particular  
web page may be marked is controlled by its creator.  
Accessing a Bookmark  
To access a bookmark:  
1. Press  
to open the browser menu.  
2. Select View Bookmarks (  
).  
3. Scroll to highlight the bookmark you’d like to access  
and select Goto ( ) to go to the Web site (or press  
the number corresponding to the bookmark you wish  
to access).  
252  
Section 3B: Sprint PCS Vision  
   
Deleting a Bookmark  
To delete a bookmark:  
1. Press  
to open the browser menu.  
2. Select View Bookmarks (  
).  
3. Scroll to highlight the bookmark you’d like to delete  
and select Options ( ).  
4. Select Delete (  
).  
) to remove the bookmark.  
5. Select OK (  
Going to a Specific Web site  
To go to a particular Web site by entering a URL (Web  
site address):  
1. Press  
2. Select Go to URL (  
3. Use your keypad to enter the URL of the Web site you  
wish to go to and press  
4. Press again to go to the Web site.  
to open the browser menu.  
).  
.
Not all Web sites are viewable on your phone.  
Note:  
Section 3B: Sprint PCS Vision  
253  
 
Reloading a Web Page  
To reload (refresh) a Web page:  
1. Press  
to open the browser menu.  
2. Select Refresh this page (  
). (The browser will  
reload the current Web page.)  
Restarting the Web Browser  
If the Web browser appears to be malfunctioning or stops  
responding, you can usually fix the problem by simply  
restarting the browser.  
To restart the Web browser:  
1. Press  
2. Select More (  
3. Select Restart Browser (  
to open the browser menu.  
).  
).  
254  
Section 3B: Sprint PCS Vision  
 
Sprint PCS Vision FAQs  
How will I know when my phone is ready for Sprint PCS  
Vision service?  
Your User name (for example, bsmith001@sprintpcs.com) will  
display in the phone number under Phone Info. listing in  
your phone’s Settings menu.  
How do I sign-in for the first time?  
You are automatically signed in to access Sprint PCS Vision  
services when you turn on your phone.  
How do I know when my phone is connected to Sprint PCS  
Vision services?  
Your phone automatically connects when Sprint PCS  
Vision service is used or an incoming message arrives.  
Your phone will also display the  
screen.  
icon at the top of the  
Can I make calls and use Sprint PCS Vision services at the  
same time?  
You cannot use voice and Sprint PCS Vision services  
simultaneously. If you receive a call while Sprint PCS  
Vision service is active, the call will be forwarded to  
voicemail. You can place an outgoing call anytime, but it  
will interrupt any in-progress Sprint PCS Vision session.  
When is my data connection active?  
Your connection is active when data is being transferred.  
Outgoing calls are allowed; incoming calls go directly to  
voicemail. When active, the  
phone’s display screen.  
indicator flashes on your  
Section 3B: Sprint PCS Vision  
255  
   
When is my data connection dormant?  
If no data is received for 10 seconds, the connection goes  
dormant. When the connection is dormant, voice calls are  
allowed. (The connection may become active again  
quickly.) If no data is received for an extended period of  
time, the connection will terminate.  
Can I sign out of data services?  
You can sign out without turning off your phone;  
however, you will not be able to browse the Web or use  
other  
Sprint PCS Vision services. While signed out, you can still  
place or receive phone calls, check voicemail, and use  
other voice services. You may sign in again at any time. To  
sign out, go to Menu (  
) > Settings (  
) > Sprint PCS  
Vision ( ) > Disable Vision (  
) in your phone’s menu.  
256  
Section 3B: Sprint PCS Vision  
 
Section 3C  
Sprint PCS Voice CommandSM  
In This Section  
With Sprint PCS, reaching your friends, family, and co-  
workers has never been easier – especially when you’re on  
the go. You can even listen to Web-based information, such  
as news, weather, and sports. Your voice does it all with  
Sprint PCS Voice Command.  
This section outlines the Sprint PCS Voice Command  
service.  
Section 3C: Sprint PCS Voice Command  
257  
       
Getting Started With Sprint PCS  
Voice Command  
With Sprint PCS Voice Command:  
You can store all your contacts’ phone numbers, so you  
can simply say the name of the person you want to call.  
There’s no need to punch in a lot of numbers,  
memorize voicemail passwords, or try to dial while  
you’re driving.  
You can call anyone in your address book – even if you  
don’t remember their phone number.  
You don’t need to worry about losing your contacts or  
address book. This advanced service is network-based,  
so if you switch or happen to lose your Sprint PCS  
Phone, you won’t lose your contacts or address book.  
It’s Easy to Get Started  
There are two easy ways to sign up for Sprint PCS Voice  
Command:  
Sign up when you purchase and activate your phone.  
Just dial  
from your Sprint PCS Phone to  
contact Sprint Customer Service and sign up.  
There is a monthly charge for Sprint PCS Voice Command.  
258  
Section 3C: Sprint PCS Voice Command  
 
Creating Your Own Address Book  
You can program up to 500 names into your Sprint personal  
address book, with each name having up to five phone  
numbers. That’s 2,500 phone numbers, and with the  
advancedtechnologyof SprintPCSVoiceCommand,youcan  
have instant access to all of them.  
There are four ways to update your address book:  
On the Web. Go to www.talk.sprintpcs.com and sign on  
with your Sprint PCS Phone Number and password to  
access a fully functional Web-based address book to  
create and update your contacts.  
Use an Existing Address Book. Automatically merge  
address books from desktop software applications with  
Sprint SyncSM Services for no additional charge. Simply  
click on the “Click to synchronize” button within your  
Sprint PCS Voice Command personal address book at  
Use Voice Recordings. Simply dial  
and say, “Add  
name.You will then be asked to say the name and  
number you want to add to your personal address  
book. Your address book can store up to 20 voice  
recorded names at once.  
Call Directory Assistance. If you don’t have a computer or  
Internet access handy, you can have Sprint PCS  
Directory Assistance look up phone numbers for you  
and automatically add them to your address book. Just  
dial  
and say “Call operator” and we’ll add two  
names and all the numbers associated with those  
names to your address book for our standard directory  
assistance charge.  
Section 3C: Sprint PCS Voice Command  
259  
   
Making a Call With Sprint PCS  
Voice Command  
To make a call with Sprint PCS Voice Command:  
1. Press  
and you’ll hear the “Ready” prompt.  
2. After the “Ready” prompt, simply say, in a natural  
voice, “Call” and the name of the person or the  
number you’d like to call. (For example, you can say,  
“Call Jane Smith at work,” “Call John Baker on the  
mobile phone,” “Call 555-1234,” or “Call Bob Miller.”)  
3. Your request will be repeated and you will be asked  
to verify. Say “Yes” to call the number or person. (The  
number will automatically be dialed.) Say “No” if you  
wish to cancel.  
Keep in mind that Sprint PCS Voice Command recognizes  
not only your voice, but any voice, so that others can  
experience the same convenience if they use your phone.  
Tip:  
FormorehelpfulhintsonSprintPCSVoiceCommand,including  
a list of recognized commands and an interactive tutorial, visit  
260  
Section 3C: Sprint PCS Voice Command  
   
Accessing Information Using  
Sprint PCS Voice Command  
To access information using Sprint PCS Voice Command:  
1. Press  
.
2. Say “Call the Web” and choose from a listing of  
information categories like news, weather, and  
sports.  
– or –  
Simply say “Call news room,” “Call the weather,Call  
Sports Central,” etc.  
Sprint PCS Voice Command is not available while roaming  
off the Sprint Nationwide PCS Network.  
Note:  
Section 3C: Sprint PCS Voice Command  
261  
   
262  
Section 4  
Safety Guidelines  
and  
Warranty Information  
 
264  
Section 4A  
Safety  
In This Section  
Part of getting the most out of your Sprint PCS Phone is learning  
how the phone works and how to care for it. This section  
outlines performance and safety guidelines that help you  
understand the basic features of your phone’s operation.  
265  
   
Getting the Most Out of Your Reception  
Keeping Tabs on Signal Strength  
The quality of each call you make or receive depends on the signal  
strength in your area. Your phone informs you of the current signal  
strength by displaying a number of bars next to the signal strength icon.  
The more bars displayed, the stronger the signal. If you’re inside a  
building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a  
Power Save feature is automatically activated. If your phone is active, it  
periodically rechecks service availability; you can also check it yourself  
by pressing any key. Anytime the Power Save feature is activated, a  
message is displayed on the screen. When a signal is found, your phone  
returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it’s  
turned on, it receives and transmits radiofrequency (RF) signals. When  
you use your phone, the system handling your call controls the power  
level. This power can range from 0.006 watts to 0.2 watts in digital  
mode.  
Knowing Radio Frequency Safety  
The design of your Sprint PCS Phone complies with updated NCRP  
standards described below.  
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)  
and the American National Standards Institute (ANSI) joined in  
updating ANSI’s 1982 standard for safety levels with respect to human  
exposure to RF signals. More than 120 scientists, engineers and  
physicians from universities, government health agencies and  
industries developed this updated standard after reviewing the  
available body of research. In 1993, the Federal Communications  
Commission (FCC) adopted this updated standard in a regulation. In  
August 1996, the FCC adopted hybrid standard consisting of the  
existing ANSI/IEEE standard and the guidelines published by the  
National Council of Radiation Protection and Measurements (NCRP).  
266  
 
Maintaining Your Phone’s Peak Performance  
There are several simple guidelines to operating your phone properly  
and maintaining safe, satisfactory service.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid spills.  
If your phone does get wet, immediately turn the power off and  
remove the battery.  
Blocking the internal antenna located in the upper right corner  
will reduce signal performance.  
For the best care of your phone, only Sprint authorized personnel  
should service your phone and accessories. Faulty service may void  
the warranty.  
Note:  
Maintaining Safe Use of and Access to  
Your Phone  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO  
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone without  
a hands-free device) is prohibited in some jurisdictions. Laws vary as to  
specific restrictions. Remember that safety always comes first.  
Purchase an optional hands-free accessory at your local Sprint  
Store, or call the Sprint PCS Accessory Hotline at 1-800-974-2221  
or by dialing #222 on your Sprint PCS Phone.  
Tip:  
SM  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any special  
regulations in a given area. Turn your phone off in areas where use is  
forbidden or when it may cause interference or danger.  
267  
 
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radiofrequency  
(RF) signals. However, RF signals from wireless phones may affect  
inadequately shielded electronic equipment.  
RF signals may affect improperly installed or inadequately shielded  
electronic operating systems and/or entertainment systems in motor  
vehicles. Check with the manufacturer or their representative to  
determine if these systems are adequately shielded from external RF  
signals. Also check with the manufacturer regarding any equipment  
that has been added to your vehicle.  
Consult the manufacturer of any personal medical devices, such as  
pacemakers and hearing aids, to determine if they are adequately  
shielded from external RF signals.  
Always turn off the phone in health care facilities and request  
permission before using the phone near medical equipment.  
Note:  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible  
interference with aircraft systems, the U.S. Federal Aviation  
Administration (FAA) regulations require you to have permission from  
a crew member to use your phone while the plane is on the ground.  
To prevent any risk of interference, FCC regulations prohibit using  
your phone while the plane is in the air.  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone off  
when in a blasting area or in other areas with signs indicating two-way  
radios should be turned off. Construction crews often use remote-  
control RF devices to set off explosives.  
Turn your phone off when you're in any area that has a potentially  
explosive atmosphere. Although it's rare, your phone and accessories  
could generate sparks. Sparks can cause an explosion or fire, resulting  
in bodily injury or even death. These areas are often, but not always,  
clearly marked. They include:  
Fueling areas such as gas stations.  
Below deck on boats.  
268  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as grain,  
dust, or metal powders.  
Any other area where you would normally be advised to turn off  
your vehicle’s engine.  
Never transport or store flammable gas, liquid or explosives in the  
compartment of your vehicle that contains your phone or  
accessories.  
Note:  
Restricting Children’s Access to Your Phone  
Your phone is not a toy. Do not allow children to play with it as they  
could hurt themselves and others, damage the phone or make calls  
that increase your Sprint PCS Invoice.  
Caring for the Battery  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s  
performance.  
Use only Sprint-approved batteries and battery chargers. These  
chargers are designed to maximize battery life. Using other  
batteries or chargers voids your warranty and may cause damage.  
In order to avoid damage, charge the battery only in temperatures  
that range from 32º F to 113º F (0º C to 45º C).  
Don’t use the battery charger in direct sunlight or in high humidity  
areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for a long  
period of time.  
269  
 
It’s best to replace the battery when it no longer provides  
acceptable performance. It can be recharged hundreds of times  
before it needs replacing.  
Don’t store the battery in high temperature areas for long periods  
of time. It’s best to follow these storage rules:  
Less than one month:  
4º F to 140º F (-20º C to 60º C)  
More than one month:  
4º F to 113º F (-20º C to 45º C)  
Disposal of Lithium Ion (Li-Ion) Batteries  
For safe disposal options of your Li-Ion batteries, contact your nearest  
Sprint authorized service center.  
Special Note: Be sure to dispose of your battery properly. In some  
areas, the disposal of batteries in household or business trash may  
be prohibited.  
For safety, do not handle a damaged or leaking Li-Ion battery.  
Note:  
270  
Acknowledging Special Precautions and  
the FCC Notice  
FCC Notice  
This phone may cause TV or radio interference if used in close  
proximity to receiving equipment. The FCC can require you to stop  
using the phone if such interference cannot be eliminated.  
Vehicles using liquefied petroleum gas (propane or butane) must  
comply with the National Fire Protection Standard (NFPA-58). For a  
copy of this standard, contact the National Fire Protections  
Association, One Batterymarch Park, Quincy, MA 02269, Attn.:  
Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in  
this document could void your warranty for this equipment and void  
your authority to operate this equipment. Only use approved batteries,  
antennas and chargers. The use of any unauthorized accessories may  
be dangerous and void the phone warranty if said accessories cause  
damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending or  
sitting on it.  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if you wear  
a handset on your body, use the Sprint supplied or approved carrying  
case, holster or other body-worn accessory. Use of non-Sprint  
approved accessories may violate FCC RF exposure guidelines.  
For more information about RF exposure, visit the FCC Website at  
Specific Absorption Rates (SAR) for Wireless Phones  
The SAR is a value that corresponds to the relative amount of RF  
energy absorbed in the head of a user of a wireless handset.  
271  
 
The SAR value of a phone is the result of an extensive testing,  
measuring and calculation process. It does not represent how much RF  
the phone emits. All phone models are tested at their highest value in  
strict laboratory settings. But when in operation, the SAR of a phone  
can be substantially less than the level reported to the FCC. This is  
because of a variety of factors including its proximity to a base station  
antenna, phone design and other factors. What is important to  
remember is that each phone meets strict federal guidelines. Variations  
in SARs do not represent a variation in safety.  
All phones must meet the federal standard, which incorporates a  
substantial margin of safety. As stated above, variations in SAR values  
between different model phones do not mean variations in safety. SAR  
values at or below the federal standard of 1.6 W/kg are considered safe  
for use by the public.  
The highest reported SAR values of the Sprint PCS VisionSM Multimedia  
Phone MM-A880 by Samsung®® are:  
AMPSmode(Part22):  
Head: 1.48 W/kg; Body-worn: 0.479W/kg  
SprintPCSmode(Part24):  
Head:1.38W/kg; Body-worn:0.546 W/kg  
FCC Radiofrequency Emission  
This phone meets the FCC Radiofrequency Emission Guidelines.  
FCC ID number: A3LSPHA880. More information  
on the phone's SAR can be found from the following FCC Website:  
272  
Owner’s Record  
The model number, regulatory number and serial number are located  
on a nameplate inside the battery compartment. Record the serial  
number in the space provided below. This will be helpful if you need  
to contact us about your phone in the future.  
SM  
®
Model:Sprint PCS Vision Multimedia Phone MM-A880 by Samsung  
Serial No.:  
Phone Guide Proprietary Notice  
CDMA Technology is licensed by QUALCOMM Incorporated under one  
or more of the following patents:  
4,901,307 5,109,390 5,267,262 5,416,797  
5,506,865 5,544,196 5,657,420 5,101,501  
5,267,261 5,414,796 5,504,773 5,535,239  
5,600,754 5,778,338 5,228,054 5,337,338  
5,710,784 5,056,109 5,568,483 5,659,569  
5,490,165 5,511,073  
T9 Text Input is licensed by Tegic Communications and is covered by  
U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other  
patents pending.  
Phone Guide template version 4A (November 2004)  
273  
   
Section 4B  
Manufacturer’s Warranty  
In This Section  
Your Sprint PCS Phone has been designed to provide you with  
reliable, worry-free service. If for any reason you have a  
problem with your equipment, please refer to the  
manufacturer’s warranty in this section.  
For information regarding the terms and conditions of  
service for your Sprint PCS Phone, please visit  
www.sprintpcs.com and click on the “Terms & Conditions”  
link at the bottom or call Sprint PCS Customer Solutions at  
1-888-211-4PCS.  
275  
   
Manufacturer’s Warranty  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.  
(“SAMSUNG”) warrants to the original purchaser (“Purchaser”) that SAMSUNG's Phones and  
accessories (“Products”) are free from defects in material and workmanship under normal use  
and service for the period commencing upon the date of purchase and continuing for the  
following specified period of time after that date:  
Phone  
1 Year  
1 Year  
Batteries  
Leather Case/Pouch/Holster  
Game Pad  
90Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by  
Purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from  
accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress, or  
modification of any part of Product, including antenna, or cosmetic damage; (b) equipment  
that has the serial number removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to normal use; (d) malfunctions  
resulting from the use of Product in conjunction with accessories, products, or ancillary/  
peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from  
improper testing, operation, maintenance, installation, or adjustment; (f) installation,  
maintenance, and service of Product, or (g) Product used or purchased outside the United  
States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80%  
of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i)  
the battery has been charged by a battery charger not specified or approved by SAMSUNG for  
charging the battery, (ii) any of the seals on the battery are broken or show evidence of  
276  
   
tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for  
which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will  
repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective  
component part of Product. To obtain service under this Limited Warranty, Purchaser must  
return Product to an authorized phone service facility in an adequate container for shipping,  
accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the  
date of purchase, the serial number of Product and the sellers' name and address. To obtain  
assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG  
may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt, reconditioned or new Product.  
Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety  
(90) days. All other repaired/replaced Product will be warranted for a period equal to the  
remainder of the original Limited Warranty on the original Product or for 90 days, whichever is  
longer. All replaced parts, components, boards and equipment shall become the property of  
SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or return of such  
Product.  
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE EXPRESS  
WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
277  
“THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN;  
OR  
“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY  
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO  
THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM  
THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING  
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM  
THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR  
BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR  
GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES,  
OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST  
PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE  
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER  
OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF  
THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY  
LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE  
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH  
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY  
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.  
278  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR  
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES  
OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,  
WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-  
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT  
VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS  
THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and  
SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees, distributors, and dealers of  
SAMSUNG are not authorized to make modifications to this Limited Warranty, or make  
additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer  
advertising or presentation, whether oral or written, do not constitute warranties by  
SAMSUNG and should not be relied upon.  
Samsung Telecommunications America, L.P.  
1301 E. Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2005 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice. [011604]  
279  
PresetMessages 47  
Recent Messages 47  
Multimedia - Channel  
Multimedia - Channel  
F
My Content Manager 247  
Foreground - Setting 59  
I
N
O
K
P
Key Tones 54  
L
Location Settings 62  
Lock Code - Changing 75  
Lock Services 77  
Locking Your Phone 74  
Phone Number - With  
M
Making Calls 30  
Playing Video and Audio  
Messaging - Deleting Old  
Messaging - Setting Alerts  
Messaging - Signature 64  
Location Settings 62  
Messaging Settings 63–  
PictBridge Printing 181  
Picture & Video - Erasing 81  
Picture & Video - Resetting  
282  
Prints at Retail 179  
Prints by Mail 180  
Dialing Sprint PCS  
Directory Assistance 8  
Operator Services 9  
Sprint PCS Vision 231–256  
Applications 232  
R
Recent Messages 47  
Ringer Types 50  
FAQs 255  
My Content Manager 247  
S
Security Features 83  
Sprint PCS Voice Command  
Making a Call 260  
Assigning Numbers 126  
Sprint Customer Service 7  
Sprint PCS Mail 241  
Sprint PCS Picture Mail -  
Downloading Pictures or  
Sprint PCS Picture Mail -  
Sprint PCS Picture Mail -  
Sprint PCS Picture Mail -  
Uploading Pictures or  
T
Taking Pictures 166–167  
Task List 144  
Text Greeting 57  
Three-Way Calling 228  
Turning Your Phone On and  
Sprint PCS Picture Mail -  
Sprint PCS Service  
283  

Twitter SWD 1004091 0707095645 001 User Manual
Toastmaster TU30CAN User Manual
Sony Ericsson W380i User Manual
Sony Ericsson T237s User Manual
Siemens GPS1000 Radio Clock 2XV9450 1AR82 User Manual
Seagate Constellation ST31000524NS User Manual
Seagate Computer Drive ST3320620A User Manual
Seagate BARRACUDA ST31000340AS User Manual
Research In Motion Blackberry Cell Phone 9300 User Manual
Nokia N77 User Manual